The Murphy Builders Site

Hi Jason !

You can reach Angus at:

"Angus McKenzie - McKenzie STOL kits" <angus.mckenzie@sympatico.ca>
or
"Angus McKenzie - McKenzie STOL kits" <angus@lweb.net >

He usually keeps at least one set in stock for quick shipment.

--
......bobp
bobp@prosumers.ca
http://www.prosumers.ca
http://bpatterson.qhealthbeauty.com
http://apatterson2.qhealthzone.com
http://apatterson2.ordermygift.com

-------------------------------orig.-------------------------
On Wednesday 25 June 2008 20:32, Rebecca Brownell wrote:

looking for contact info for Angus MacKenkie re stoll kit.
Thanks
Jason 817R

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

looking for contact info for Angus MacKenkie re stoll kit.
Thanks
Jason 817R

Hi Bob thanks for the response.I haven't heard from Angus yet and I'm
about torivet the stringers on the leading edge
skins.Does yours use the same row of rivets as the stringers or does
one make new holes top and bottom to attach
the new leading edge after assembly of the wing is complete?I guess
thats a long way of asking ,do i need to worry about
installing stol kit now or can it simply be done after assembly?
Thanks ,if you know
Jason 817R

Good to see you last weekend

On 25-Jun-08, at 9:13 PM, Bob Patterson wrote:

Hi Jason !

You can reach Angus at:

"Angus McKenzie - McKenzie STOL kits" <angus.mckenzie@sympatico.ca>
or
"Angus McKenzie - McKenzie STOL kits" <angus@lweb.net >

He usually keeps at least one set in stock for quick shipment.

--
......bobp
bobp@prosumers.ca
http://www.prosumers.ca
http://bpatterson.qhealthbeauty.com
http://apatterson2.qhealthzone.com
http://apatterson2.ordermygift.com

-------------------------------orig.-------------------------

On Wednesday 25 June 2008 20:32, Rebecca Brownell wrote:

looking for contact info for Angus MacKenkie re stoll kit.
Thanks
Jason 817R

Hi Bob thanks for the response.I haven't heard from Angus yet and I'm
about torivet the stringers on the leading edge
skins.Does yours use the same row of rivets as the stringers or does
one make new holes top and bottom to attach
the new leading edge after assembly of the wing is complete?I guess
thats a long way of asking ,do i need to worry about
installing stol kit now or can it simply be done after assembly?
Thanks ,if you know
Jason 817R

Three rivets on each leading edge rib should be countersunk. I know
I've
posted details in the archives. Anyway for sure it does not affect any
of the stringer rivets.
ken

Rebecca Brownell wrote:

Hi Bob thanks for the response.I haven't heard from Angus yet and I'm
about torivet the stringers on the leading edge
skins.Does yours use the same row of rivets as the stringers or does
one make new holes top and bottom to attach
the new leading edge after assembly of the wing is complete?I guess
thats a long way of asking ,do i need to worry about
installing stol kit now or can it simply be done after assembly?
Thanks ,if you know
Jason 817R

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

I've got a couple of photos that Angus sent me on installing his
STOL kit. Unfortunately I deleted the email with the address of who
asked the original question. If you want to send me an email address
I'll forward his info.

Keith R661 to be completed in 2020!! Maybe

--- On Fri, 6/27/08, Bob Patterson <bobp@prosumers.ca> wrote:

From: Bob Patterson <bobp@prosumers.ca>
Subject: Re: [rebel-builders] contact info - McKenzie STOL kit
To: rebel-builders@dcsol.com
Date: Friday, June 27, 2008, 10:04 PM

Hi Jason !

You can install the STOL kit later - BUT --- it's important to
use countersunk rivets in 2 places on each leading edge rib ....
so the cuff can fit properly.

Unfortunately, I can't remember WHICH 2 rivets !!
Hopefully Angus will answer here - or someone with more recent
memory of installation .... Ken ???

--
......bobp
bobp@prosumers.ca
http://www.prosumers.ca
http://bpatterson.qhealthbeauty.com
http://apatterson2.qhealthzone.com
http://apatterson2.ordermygift.com

-------------------------------orig.-------------------------
On Saturday 28 June 2008 00:25, Rebecca Brownell wrote:

Hi Bob thanks for the response.I haven't heard from Angus yet and

I'm

about torivet the stringers on the leading edge
skins.Does yours use the same row of rivets as the stringers or does
one make new holes top and bottom to attach
the new leading edge after assembly of the wing is complete?I guess
thats a long way of asking ,do i need to worry about
installing stol kit now or can it simply be done after assembly?
Thanks ,if you know
Jason 817R

Good to see you last weekend

On 25-Jun-08, at 9:13 PM, Bob Patterson wrote:

Hi Jason !

You can reach Angus at:

"Angus McKenzie - McKenzie STOL kits"

<angus.mckenzie@sympatico.ca>

or
"Angus McKenzie - McKenzie STOL kits" <angus@lweb.net

He usually keeps at least one set in stock for quick shipment.

--
......bobp
bobp@prosumers.ca
http://www.prosumers.ca
http://bpatterson.qhealthbeauty.com
http://apatterson2.qhealthzone.com
http://apatterson2.ordermygift.com

-------------------------------orig.-------------------------

On Wednesday 25 June 2008 20:32, Rebecca Brownell wrote:

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

I've got a couple of photos that Angus sent me on installing his
STOL kit. Unfortunately I deleted the email with the address of who
asked the original question. If you want to send me an email address
I'll forward his info.

Keith R661 to be completed in 2020!! Maybe

--- On Fri, 6/27/08, Bob Patterson <bobp@prosumers.ca> wrote:

From: Bob Patterson <bobp@prosumers.ca>
Subject: Re: [rebel-builders] contact info - McKenzie STOL kit
To: rebel-builders@dcsol.com
Date: Friday, June 27, 2008, 10:04 PM

Hi Jason !

You can install the STOL kit later - BUT --- it's important to
use countersunk rivets in 2 places on each leading edge rib ....
so the cuff can fit properly.

Unfortunately, I can't remember WHICH 2 rivets !!
Hopefully Angus will answer here - or someone with more recent
memory of installation .... Ken ???

--
......bobp
bobp@prosumers.ca
http://www.prosumers.ca
http://bpatterson.qhealthbeauty.com
http://apatterson2.qhealthzone.com
http://apatterson2.ordermygift.com

-------------------------------orig.-------------------------
On Saturday 28 June 2008 00:25, Rebecca Brownell wrote:

Hi Bob thanks for the response.I haven't heard from Angus yet and

I'm

about torivet the stringers on the leading edge
skins.Does yours use the same row of rivets as the stringers or does
one make new holes top and bottom to attach
the new leading edge after assembly of the wing is complete?I guess
thats a long way of asking ,do i need to worry about
installing stol kit now or can it simply be done after assembly?
Thanks ,if you know
Jason 817R

Good to see you last weekend

On 25-Jun-08, at 9:13 PM, Bob Patterson wrote:

Hi Jason !

You can reach Angus at:

"Angus McKenzie - McKenzie STOL kits"

<angus.mckenzie@sympatico.ca>

or
"Angus McKenzie - McKenzie STOL kits" <angus@lweb.net

He usually keeps at least one set in stock for quick shipment.

--
......bobp
bobp@prosumers.ca
http://www.prosumers.ca
http://bpatterson.qhealthbeauty.com
http://apatterson2.qhealthzone.com
http://apatterson2.ordermygift.com

-------------------------------orig.-------------------------

On Wednesday 25 June 2008 20:32, Rebecca Brownell wrote:

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Okay, sent the info I have to your address. Please let me know if
you get it.
Keith

--- On Sat, 6/28/08, Rebecca Brownell <brownell@candlelight.ca> wrote:

From: Rebecca Brownell <brownell@candlelight.ca>
Subject: Re: [rebel-builders] contact info - McKenzie STOL kit
To: rebel-builders@dcsol.com
Date: Saturday, June 28, 2008, 9:23 AM

Hello Keith
That would be great its brownell@candlelight.ca
thanks
Jason
On 28-Jun-08, at 9:50 AM, Keith Leitch wrote:

I've got a couple of photos that Angus sent me on installing his
STOL kit. Unfortunately I deleted the email with the address of who
asked the original question. If you want to send me an email address
I'll forward his info.

Keith R661 to be completed in 2020!! Maybe

--- On Fri, 6/27/08, Bob Patterson <bobp@prosumers.ca> wrote:

From: Bob Patterson <bobp@prosumers.ca>
Subject: Re: [rebel-builders] contact info - McKenzie STOL kit
To: rebel-builders@dcsol.com
Date: Friday, June 27, 2008, 10:04 PM

Hi Jason !

You can install the STOL kit later - BUT --- it's important to
use countersunk rivets in 2 places on each leading edge rib ....
so the cuff can fit properly.

Unfortunately, I can't remember WHICH 2 rivets !!
Hopefully Angus will answer here - or someone with more recent
memory of installation .... Ken ???

--
......bobp
bobp@prosumers.ca
http://www.prosumers.ca
http://bpatterson.qhealthbeauty.com
http://apatterson2.qhealthzone.com
http://apatterson2.ordermygift.com

-------------------------------orig.-------------------------
On Saturday 28 June 2008 00:25, Rebecca Brownell wrote:

Hi Bob thanks for the response.I haven't heard from Angus yet and

I'm

about torivet the stringers on the leading edge
skins.Does yours use the same row of rivets as the stringers or does
one make new holes top and bottom to attach
the new leading edge after assembly of the wing is complete?I guess
thats a long way of asking ,do i need to worry about
installing stol kit now or can it simply be done after assembly?
Thanks ,if you know
Jason 817R

Good to see you last weekend

On 25-Jun-08, at 9:13 PM, Bob Patterson wrote:

<angus.mckenzie@sympatico.ca>

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Okay, sent the info I have to your address. Please let me know if
you get it.
Keith

--- On Sat, 6/28/08, Rebecca Brownell <brownell@candlelight.ca>

From: Rebecca Brownell <brownell@candlelight.ca>
Subject: Re: [rebel-builders] contact info - McKenzie STOL kit
To: rebel-builders@dcsol.com
Date: Saturday, June 28, 2008, 9:23 AM

Hello Keith
That would be great its brownell@candlelight.ca
thanks
Jason
On 28-Jun-08, at 9:50 AM, Keith Leitch wrote:

I've got a couple of photos that Angus sent me on installing his
STOL kit. Unfortunately I deleted the email with the address of who
asked the original question. If you want to send me an email address
I'll forward his info.

Keith R661 to be completed in 2020!! Maybe

--- On Fri, 6/27/08, Bob Patterson <bobp@prosumers.ca> wrote:

From: Bob Patterson <bobp@prosumers.ca>
Subject: Re: [rebel-builders] contact info - McKenzie STOL kit
To: rebel-builders@dcsol.com
Date: Friday, June 27, 2008, 10:04 PM

Hi Jason !

You can install the STOL kit later - BUT --- it's important to
use countersunk rivets in 2 places on each leading edge rib ....
so the cuff can fit properly.

Unfortunately, I can't remember WHICH 2 rivets !!
Hopefully Angus will answer here - or someone with more recent
memory of installation .... Ken ???

--
......bobp
bobp@prosumers.ca
http://www.prosumers.ca
http://bpatterson.qhealthbeauty.com
http://apatterson2.qhealthzone.com
http://apatterson2.ordermygift.com

-------------------------------orig.-------------------------
On Saturday 28 June 2008 00:25, Rebecca Brownell wrote:

Hi Bob thanks for the response.I haven't heard from Angus yet

I'm

about torivet the stringers on the leading edge
skins.Does yours use the same row of rivets as the stringers or

one make new holes top and bottom to attach
the new leading edge after assembly of the wing is complete?I

thats a long way of asking ,do i need to worry about
installing stol kit now or can it simply be done after assembly?
Thanks ,if you know
Jason 817R

Good to see you last weekend

On 25-Jun-08, at 9:13 PM, Bob Patterson wrote:

<angus.mckenzie@sympatico.ca>

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Okay, sent the info I have to your address. Please let me know if
you get it.
Keith

--- On Sat, 6/28/08, Rebecca Brownell <brownell@candlelight.ca>

From: Rebecca Brownell <brownell@candlelight.ca>
Subject: Re: [rebel-builders] contact info - McKenzie STOL kit
To: rebel-builders@dcsol.com
Date: Saturday, June 28, 2008, 9:23 AM

Hello Keith
That would be great its brownell@candlelight.ca
thanks
Jason
On 28-Jun-08, at 9:50 AM, Keith Leitch wrote:

I've got a couple of photos that Angus sent me on installing his
STOL kit. Unfortunately I deleted the email with the address of who
asked the original question. If you want to send me an email address
I'll forward his info.

Keith R661 to be completed in 2020!! Maybe

--- On Fri, 6/27/08, Bob Patterson <bobp@prosumers.ca> wrote:

From: Bob Patterson <bobp@prosumers.ca>
Subject: Re: [rebel-builders] contact info - McKenzie STOL kit
To: rebel-builders@dcsol.com
Date: Friday, June 27, 2008, 10:04 PM

Hi Jason !

You can install the STOL kit later - BUT --- it's important to
use countersunk rivets in 2 places on each leading edge rib ....
so the cuff can fit properly.

Unfortunately, I can't remember WHICH 2 rivets !!
Hopefully Angus will answer here - or someone with more recent
memory of installation .... Ken ???

--
......bobp
bobp@prosumers.ca
http://www.prosumers.ca
http://bpatterson.qhealthbeauty.com
http://apatterson2.qhealthzone.com
http://apatterson2.ordermygift.com

-------------------------------orig.-------------------------
On Saturday 28 June 2008 00:25, Rebecca Brownell wrote:

Hi Bob thanks for the response.I haven't heard from Angus yet

I'm

about torivet the stringers on the leading edge
skins.Does yours use the same row of rivets as the stringers or

one make new holes top and bottom to attach
the new leading edge after assembly of the wing is complete?I

thats a long way of asking ,do i need to worry about
installing stol kit now or can it simply be done after assembly?
Thanks ,if you know
Jason 817R

Good to see you last weekend

On 25-Jun-08, at 9:13 PM, Bob Patterson wrote:

<angus.mckenzie@sympatico.ca>

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Speaking of stol kits is there one available for Elite tail draggers

Keith Oliver
Elite 654
Maine

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Keith Leitch
Sent: Saturday, June 28, 2008 11:22 AM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] contact info - McKenzie STOL kit


You are welcome.

--- On Sat, 6/28/08, Rebecca Brownell <brownell@candlelight.ca> wrote:

From: Rebecca Brownell <brownell@candlelight.ca>
Subject: Re: [rebel-builders] contact info - McKenzie STOL kit
To: rebel-builders@dcsol.com
Date: Saturday, June 28, 2008, 10:17 AM

Received - thank you so much. Huge help!

Jason and Rebecca

On 28-Jun-08, at 10:49 AM, Keith Leitch wrote:

Okay, sent the info I have to your address. Please let me know if
you get it.
Keith

--- On Sat, 6/28/08, Rebecca Brownell <brownell@candlelight.ca>

wrote:

From: Rebecca Brownell <brownell@candlelight.ca>
Subject: Re: [rebel-builders] contact info - McKenzie STOL kit
To: rebel-builders@dcsol.com
Date: Saturday, June 28, 2008, 9:23 AM

Hello Keith
That would be great its brownell@candlelight.ca
thanks
Jason

On 28-Jun-08, at 9:50 AM, Keith Leitch wrote:

I've got a couple of photos that Angus sent me on installing his
STOL kit. Unfortunately I deleted the email with the address of who
asked the original question. If you want to send me an email address
I'll forward his info.

Keith R661 to be completed in 2020!! Maybe

--- On Fri, 6/27/08, Bob Patterson <bobp@prosumers.ca> wrote:

From: Bob Patterson <bobp@prosumers.ca>
Subject: Re: [rebel-builders] contact info - McKenzie STOL kit
To: rebel-builders@dcsol.com
Date: Friday, June 27, 2008, 10:04 PM

Hi Jason !

You can install the STOL kit later - BUT --- it's important to
use countersunk rivets in 2 places on each leading edge rib ....
so the cuff can fit properly.

Unfortunately, I can't remember WHICH 2 rivets !!
Hopefully Angus will answer here - or someone with more recent
memory of installation .... Ken ???

--
......bobp
bobp@prosumers.ca
http://www.prosumers.ca
http://bpatterson.qhealthbeauty.com
http://apatterson2.qhealthzone.com
http://apatterson2.ordermygift.com

-------------------------------orig.-------------------------

On Saturday 28 June 2008 00:25, Rebecca Brownell wrote:

and

I'm

does

guess

<angus.mckenzie@sympatico.ca>

<angus@lweb.net