[rebel-builders] "F" bit for strut attach fitting holes
Posted: Sun Feb 19, 2012 4:43 pm
I used a 1/4" bit. I don't know why the manial says F but I used fractional
bits for all my bolt holes.
At 09:18 PM 6/18/2008 -0230, you wrote:
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
bits for all my bolt holes.
At 09:18 PM 6/18/2008 -0230, you wrote:
holes for the attach fittings ..?Anyone know why we're instructed to use an "F" bit to drill out the strut
AN4 bolts.The "F" bit I have is quite a bit larger than a 1/4" bit needed for the
DrewThanks
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------