[rebel-builders] Oil pressure gauge
Posted: Sun Feb 19, 2012 4:43 pm
Mike
It it helps, I have a 0-30 psi VDO electric sensor that feeds my Grand
Rapids EIS with coolant pressure. I can find a part number if you need
it. There must be an analog gauge that goes with that.
On occasion I've also fed ordinary voltmeters with such sensors but
these days I'd look for a solid state sensor if making a custom sensor.
Ken
Mike Kimball wrote:
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
It it helps, I have a 0-30 psi VDO electric sensor that feeds my Grand
Rapids EIS with coolant pressure. I can find a part number if you need
it. There must be an analog gauge that goes with that.
On occasion I've also fed ordinary voltmeters with such sensors but
these days I'd look for a solid state sensor if making a custom sensor.
Ken
Mike Kimball wrote:
Does anybody know where I can get an electric, 0-30 psi oil pressure gauge?
My PSRU runs between 0 and 20 psi depending on RPM and I can't monitor that
very well with the 0-80 psi gauge I currently have.
Mike
044SR
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------