[rebel-builders] trimming skins
Posted: Sun Feb 19, 2012 4:38 pm
Outboard end ...yes... in line with the end rib of the stab/fin.. inboard
end.. do not be in a rush to trim them. It can be nicely fitted to the
fuselage to need nothing but a rubber edging to fill the gap between the
two.
----- Original Message -----
From: "Rebecca Brownell" <brownell@candlelight.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, May 07, 2008 8:01 PM
Subject: [rebel-builders] trimming skins
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
end.. do not be in a rush to trim them. It can be nicely fitted to the
fuselage to need nothing but a rubber edging to fill the gap between the
two.
----- Original Message -----
From: "Rebecca Brownell" <brownell@candlelight.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, May 07, 2008 8:01 PM
Subject: [rebel-builders] trimming skins
Hi all
I wanted to double check something that wasn't overly clear in the
manual.
When trimming the leading edge skins on the fin and stabs,I am assuming
they ere trimmed flush and parallel to the ends.I apologise if this
seems like a stupid question.
Any words of wisdom appreciated.
thanks
Jason
817R
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------