[rebel-builders] SR-108 headliner poor fit
Posted: Sun Feb 19, 2012 4:38 pm
Has any one used the Murphy fiberglass headliner?
I am trying to fit mine; before I do a bunch of heavy cutting and
chopping I wanted to ask.
It appears that I will have to cut out for the over-head bulkhead to
clear between stations 3 & 4 (between the forward 4x12" oval cut outs,
and the 8"x10" skylight directly above the pilot & c/p seats) that
structure seems to be holding the headliner down by at least 2" so that
the headliner can not get close to the top skin in that area. It is
almost aproper fit at the aft skylights.
Dick Wampach SR-108
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
I am trying to fit mine; before I do a bunch of heavy cutting and
chopping I wanted to ask.
It appears that I will have to cut out for the over-head bulkhead to
clear between stations 3 & 4 (between the forward 4x12" oval cut outs,
and the 8"x10" skylight directly above the pilot & c/p seats) that
structure seems to be holding the headliner down by at least 2" so that
the headliner can not get close to the top skin in that area. It is
almost aproper fit at the aft skylights.
Dick Wampach SR-108
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------