The Murphy Builders Site

On my Moose, I moved my seat rails back as you plan and it has worked well.
Even my wife, who is just over 5' still does not use the forward most holes.
The only problem I have found, is that to remove the front seats, I have to
remove the rear ones first to have enough room to slide the front ones off
the tracks. Takes only a minute or two extra, however.

Charlie Starr - N96CS

Charlie Starr
----- Original Message -----
From: "Jason Beall" <super_rebel131@yahoo.com>
To: "new list server" <rebel-builders@dcsol.com>
Sent: Monday, May 05, 2008 1:43 PM
Subject: [rebel-builders] Moose seat rail placement

Guys,

I installed my seats on the seat rails last night and
was playing around with placement. I was thinking I
would move the rails about 3 inches aft of the aft
edge of the FUS-715 gear box plate. The furthest
forward seat position is far enough forward for the
smallest of pilots.

Any thoughts?

-Jason



____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62s ... o8Wcj9tAcJ



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------