The Murphy Builders Site

For builders of Murphy Aircraft Manufacturing kits - Bringing builders together
https://www.murphybuilders.net/

First Flight

https://www.murphybuilders.net/viewtopic.php?f=1&t=881

Page 1 of 5

First Flight

Posted: Fri Feb 17, 2012 5:57 pm
by Walter Klatt
Congratulations. I first flew 107R a couple of months ago, and I know the feeling. Let us
know your performance stats once you get some hours and testing completed.

Charles Bailey wrote:
All,
Rebel #176, First flight today 9/4/2000 at AWO, 0.7 Hrs flight.

My Rebel is Franklin Powered (120HP Sport 4) Warp drive prop 3 blade square
tip, weight 915#, Empty CG at 10.3 on spring gear.

The flight went well, Ya, it flew just just right, well balanced and no
surprises.
Thanks for the landing tips, I don't know if I used them (still on cloud
9), but that was the best landing I have made in year.

Charles Bailey
Rebel 225PC

*-----------------------------------------------------------------------------------*
The Murphy Rebel Builders List is for the discussion
between builders and owners of Murphy Rebel aircraft.
Archives located at:
http://www.dcsol.com/murphy-rebel/lists/default.htm
*-----------------------------------------------------------------------------------*
*-----------------------------------------------------------------------------------*
The Murphy Rebel Builders List is for the discussion
between builders and owners of Murphy Rebel aircraft.
Archives located at:
http://www.dcsol.com/murphy-rebel/lists/default.htm
*-----------------------------------------------------------------------------------*




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

First Flight

Posted: Fri Feb 17, 2012 5:57 pm
by LisaFly99
Charles B.
CONGRATULATIONS on first flight!!!!
Phil&Lisa Smith #460 N414D
*-----------------------------------------------------------------------------------*
The Murphy Rebel Builders List is for the discussion
between builders and owners of Murphy Rebel aircraft.
Archives located at:
http://www.dcsol.com/murphy-rebel/lists/default.htm
*-----------------------------------------------------------------------------------*




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

First Flight

Posted: Fri Feb 17, 2012 5:57 pm
by NormIsler
Charles Bailey

Congratulations on First Flight!!!!!
I'll bet it was not only the best, but also the happiest landing you have
made in a year, being in your own brand new airplane!

Keep us posted on the future flights!

Norm & Elise Isler
Elite 702E
*-----------------------------------------------------------------------------------*
The Murphy Rebel Builders List is for the discussion
between builders and owners of Murphy Rebel aircraft.
Archives located at:
http://www.dcsol.com/murphy-rebel/lists/default.htm
*-----------------------------------------------------------------------------------*




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

First Flight

Posted: Fri Feb 17, 2012 5:57 pm
by Charles Bailey
All,
Rebel #176, First flight today 9/4/2000 at AWO, 0.7 Hrs flight.

My Rebel is Franklin Powered (120HP Sport 4) Warp drive prop 3 blade square
tip, weight 915#, Empty CG at 10.3 on spring gear.

The flight went well, Ya, it flew just just right, well balanced and no
surprises.
Thanks for the landing tips, I don't know if I used them (still on cloud
9), but that was the best landing I have made in year.

Charles Bailey
Rebel 225PC

*-----------------------------------------------------------------------------------*
The Murphy Rebel Builders List is for the discussion
between builders and owners of Murphy Rebel aircraft.
Archives located at:
http://www.dcsol.com/murphy-rebel/lists/default.htm
*-----------------------------------------------------------------------------------*




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

First Flight

Posted: Fri Feb 17, 2012 5:57 pm
by Eric Fogelin
Fantastic. Congratulations.

Eric

-----Original Message-----
From: Charles Bailey [mailto:baileyca@wa.freei.net]
Sent: Monday, September 04, 2000 5:04 PM
To: murphy-rebel@dcsol.com
Subject: First Flight


All,
Rebel #176, First flight today 9/4/2000 at AWO, 0.7 Hrs flight.

My Rebel is Franklin Powered (120HP Sport 4) Warp drive prop 3 blade square
tip, weight 915#, Empty CG at 10.3 on spring gear.

The flight went well, Ya, it flew just just right, well balanced and no
surprises.
Thanks for the landing tips, I don't know if I used them (still on cloud
9), but that was the best landing I have made in year.

Charles Bailey
Rebel 225PC

*---------------------------------------------------------------------------
--------*
The Murphy Rebel Builders List is for the discussion
between builders and owners of Murphy Rebel aircraft.
Archives located at:
http://www.dcsol.com/murphy-rebel/lists/default.htm
*---------------------------------------------------------------------------
--------*

*-----------------------------------------------------------------------------------*
The Murphy Rebel Builders List is for the discussion
between builders and owners of Murphy Rebel aircraft.
Archives located at:
http://www.dcsol.com/murphy-rebel/lists/default.htm
*-----------------------------------------------------------------------------------*




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

First Flight

Posted: Fri Feb 17, 2012 5:57 pm
by Rebflyer
Hey Charles!!
Great news! Now you too can tell everyone to keep at it it's worth it!!
Curt N97MR








11
*-----------------------------------------------------------------------------------*
The Murphy Rebel Builders List is for the discussion
between builders and owners of Murphy Rebel aircraft.
Archives located at:
http://www.dcsol.com/murphy-rebel/lists/default.htm
*-----------------------------------------------------------------------------------*




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

First Flight

Posted: Fri Feb 17, 2012 10:04 pm
by Al & Deb Paxhia
Hi Gang,
Today was the first flight of 026SR, 5 years in the building. All I can say
is rock solid airplane. I have only two squawks, the static port is on the
Pitot mast and is getting pressurized, airspeed indicated 60MPH until I
opened the alt static port, airspeed and altimeter then looked much better.
Second the engine baffle is rubbing on the cowl, baffle needs a trim.
As many of you have said stalls were a non event, clean 60MPH, full flaps 50
MPH, oil temp 190 in cruse and 225 during slow flight. I have 40 hours to
fly-off and my area is a 50 mile radius of Olympia, WA, if your in that area
give me a call and I'll drop in.
Keep building it's worth it!
Al
*-------------------------------------------------------------------------*
To unsubscribe go to http://www.dcsol.com:81/public/listserv.htm
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

First Flight

Posted: Fri Feb 17, 2012 10:04 pm
by Scott & Leere' Aldrich
Congratulations Al!! ..Keep us posted on the flying.

Scott Aldrich





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

First Flight

Posted: Fri Feb 17, 2012 10:04 pm
by Sam & Sandi Archer
Congratulations Al & Deb. We are 5 years into the building of our "Elite".
90 percent finished so only 90 percent to go. We are having a fly-in here in
Kelso, June 8, and it would really be neat if you flew down here and won
first place of one kind or another. We are having old and custom cars, Young
Eagle Flights, maybe a power parachute and hopefully you in your "MOOSE" .
Again congratulations, Sam & Sandi Archer
----- Original Message -----
From: "Al & Deb Paxhia" <paxhia2@attbi.com>
To: <murphy-rebel@dcsol.com>
Sent: Saturday, April 20, 2002 5:09 PM
Subject: First Flight

Hi Gang,
Today was the first flight of 026SR, 5 years in the building. All I can
say
is rock solid airplane. I have only two squawks, the static port is on the
Pitot mast and is getting pressurized, airspeed indicated 60MPH until I
opened the alt static port, airspeed and altimeter then looked much
better.
Second the engine baffle is rubbing on the cowl, baffle needs a trim.
As many of you have said stalls were a non event, clean 60MPH, full flaps
50
MPH, oil temp 190 in cruse and 225 during slow flight. I have 40 hours to
fly-off and my area is a 50 mile radius of Olympia, WA, if your in that
area
give me a call and I'll drop in.
Keep building it's worth it!
Al
*-------------------------------------------------------------------------*
To unsubscribe go to http://www.dcsol.com:81/public/listserv.htm
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*
*-------------------------------------------------------------------------*
To unsubscribe go to http://www.dcsol.com:81/public/listserv.htm
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

First Flight

Posted: Fri Feb 17, 2012 10:04 pm
by Bob Patterson
Congratulations Guys !!!

Ain't it WONDERFUL ???!!!!!!

....bobp

---------------------------------orig.----------------------------
At 05:09 PM 4/20/02 -0700, you wrote:
Hi Gang,
Today was the first flight of 026SR, 5 years in the building. All I can say
is rock solid airplane. I have only two squawks, the static port is on the
Pitot mast and is getting pressurized, airspeed indicated 60MPH until I
opened the alt static port, airspeed and altimeter then looked much better.
Second the engine baffle is rubbing on the cowl, baffle needs a trim.
As many of you have said stalls were a non event, clean 60MPH, full flaps 50
MPH, oil temp 190 in cruse and 225 during slow flight. I have 40 hours to
fly-off and my area is a 50 mile radius of Olympia, WA, if your in that area
give me a call and I'll drop in.
Keep building it's worth it!
Al
*-------------------------------------------------------------------------*
To unsubscribe go to http://www.dcsol.com:81/public/listserv.htm
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*


*-------------------------------------------------------------------------*
To unsubscribe go to http://www.dcsol.com:81/public/listserv.htm
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

First Flight

Posted: Fri Feb 17, 2012 10:04 pm
by John Worden/Nancy Bulman
Good news Al.
Way to go!
John
SR012

At 05:09 PM 4/20/2002, you wrote:
Hi Gang,
Today was the first flight of 026SR, 5 years in the building. All I can say
is rock solid airplane. I have only two squawks, the static port is on the
Pitot mast and is getting pressurized, airspeed indicated 60MPH until I
opened the alt static port, airspeed and altimeter then looked much better.
Second the engine baffle is rubbing on the cowl, baffle needs a trim.
As many of you have said stalls were a non event, clean 60MPH, full flaps 50
MPH, oil temp 190 in cruse and 225 during slow flight. I have 40 hours to
fly-off and my area is a 50 mile radius of Olympia, WA, if your in that area
give me a call and I'll drop in.
Keep building it's worth it!
Al
*-------------------------------------------------------------------------*
To unsubscribe go to http://www.dcsol.com:81/public/listserv.htm
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*


*-------------------------------------------------------------------------*
To unsubscribe go to http://www.dcsol.com:81/public/listserv.htm
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

First Flight

Posted: Fri Feb 17, 2012 10:04 pm
by Wayne G. O'Shea
Another one that can now sign off with "keep at it it's worth it"!!!

A great accomplishment Al!

Now maybe Deb can get you to knock off some of the "to do" items, from the
list on the fridge! Of course, only on the rainy days that is!!

Cheers,
Wayne

----- Original Message -----
From: "Al & Deb Paxhia" <paxhia2@attbi.com>
To: <murphy-rebel@dcsol.com>
Sent: Saturday, April 20, 2002 8:09 PM
Subject: First Flight

Hi Gang,
Today was the first flight of 026SR, 5 years in the building. All I can
say
is rock solid airplane. I have only two squawks, the static port is on the
Pitot mast and is getting pressurized, airspeed indicated 60MPH until I
opened the alt static port, airspeed and altimeter then looked much
better.
Second the engine baffle is rubbing on the cowl, baffle needs a trim.
As many of you have said stalls were a non event, clean 60MPH, full flaps
50
MPH, oil temp 190 in cruse and 225 during slow flight. I have 40 hours to
fly-off and my area is a 50 mile radius of Olympia, WA, if your in that
area
give me a call and I'll drop in.
Keep building it's worth it!
Al
*-------------------------------------------------------------------------*
To unsubscribe go to http://www.dcsol.com:81/public/listserv.htm
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*
*-------------------------------------------------------------------------*
To unsubscribe go to http://www.dcsol.com:81/public/listserv.htm
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

First Flight

Posted: Fri Feb 17, 2012 10:04 pm
by Legeorgen
Congratulations on first flight,

Way to go Al! Have fun flying off those 40 hours. I hope you can make it to Arlington in July.

Bruce G 357R

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

First Flight

Posted: Fri Feb 17, 2012 10:04 pm
by Shira Ellsworth
Congratulations on your first flight.
We are getting close to our first flight, hopefully in July or August, the
main thing is we are waiting for our Lycoming 0-320 to come in June.
We are building 628R a Murphy Rebel. (this is my first email
to y'all) We are way down south here in Orlando, Florida, only
know of one other Murphy here in Florida, which is in Lake City.
If anyone else is nearby let us know, we would love to share ideas
and see your airplane.
Jeff and Shira Ellsworth
628R
----- Original Message -----
From: "Al & Deb Paxhia" <paxhia2@attbi.com>
To: <murphy-rebel@dcsol.com>
Sent: Saturday, April 20, 2002 8:09 PM
Subject: First Flight

Hi Gang,
Today was the first flight of 026SR, 5 years in the building. All I can
say
is rock solid airplane. I have only two squawks, the static port is on the
Pitot mast and is getting pressurized, airspeed indicated 60MPH until I
opened the alt static port, airspeed and altimeter then looked much
better.
Second the engine baffle is rubbing on the cowl, baffle needs a trim.
As many of you have said stalls were a non event, clean 60MPH, full flaps
50
MPH, oil temp 190 in cruse and 225 during slow flight. I have 40 hours to
fly-off and my area is a 50 mile radius of Olympia, WA, if your in that
area
give me a call and I'll drop in.
Keep building it's worth it!
Al
*-------------------------------------------------------------------------*
To unsubscribe go to http://www.dcsol.com:81/public/listserv.htm
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*
*-------------------------------------------------------------------------*
To unsubscribe go to http://www.dcsol.com:81/public/listserv.htm
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

First Flight

Posted: Fri Feb 17, 2012 10:04 pm
by brian amendala
Hi my name is Brian Amendala. Congrats on your first flight! I too live in
Olympia and fly a rebel on amphibs based out of Olympia airport. I have
around 130 hours on the plane that my dad and I built. It is a blast!!
I would love to see your airplane! E-mail me or stop by our hanger, we're
in H-10 Thanks, Brian
From: "Shira Ellsworth" <SELLSWORTH@cfl.rr.com>
Reply-To: <murphy-rebel@dcsol.com>
To: murphy-rebel@dcsol.com
Subject: Re: First Flight
Date: Sun, 21 Apr 2002 15:25:32 -0400

Congratulations on your first flight.
We are getting close to our first flight, hopefully in July or August, the
main thing is we are waiting for our Lycoming 0-320 to come in June.
We are building 628R a Murphy Rebel. (this is my first email
to y'all) We are way down south here in Orlando, Florida, only
know of one other Murphy here in Florida, which is in Lake City.
If anyone else is nearby let us know, we would love to share ideas
and see your airplane.
Jeff and Shira Ellsworth
628R
----- Original Message -----
From: "Al & Deb Paxhia" <paxhia2@attbi.com>
To: <murphy-rebel@dcsol.com>
Sent: Saturday, April 20, 2002 8:09 PM
Subject: First Flight

Hi Gang,
Today was the first flight of 026SR, 5 years in the building. All I can
say
is rock solid airplane. I have only two squawks, the static port is on
the
Pitot mast and is getting pressurized, airspeed indicated 60MPH until I
opened the alt static port, airspeed and altimeter then looked much
better.
Second the engine baffle is rubbing on the cowl, baffle needs a trim.
As many of you have said stalls were a non event, clean 60MPH, full
flaps
50
MPH, oil temp 190 in cruse and 225 during slow flight. I have 40 hours
to
fly-off and my area is a 50 mile radius of Olympia, WA, if your in that
area
give me a call and I'll drop in.
Keep building it's worth it!
Al
*-------------------------------------------------------------------------*
To unsubscribe go to http://www.dcsol.com:81/public/listserv.htm
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*
*-------------------------------------------------------------------------*
To unsubscribe go to http://www.dcsol.com:81/public/listserv.htm
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*


*-------------------------------------------------------------------------*
To unsubscribe go to http://www.dcsol.com:81/public/listserv.htm
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*


_________________________________________________________________
Join the world
All times are UTC-08:00
Page 1 of 5
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/