Hi wayne
Assume this will work for my rebel with 0-320 b2b, same engine as yours
Mike#007
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Wayne
G. O'Shea
Sent: Friday, January 18, 2008 11:50 PM
To: Murphy Rebel Builders List
Subject: [rebel-builders] 10" Spinner for a McCauley O-320 prop
Anyone needs one... I've got one up on ebay. Would work well with the nose
bowl and doors cowling on a Rebel. Wayne
http://cgi.ebay.ca/ws/eBayISAPI.dll?Vie ... 8&ssPageNa
me=STRK:MESE:IT&ih=013
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Do you want this big green box to go away? Well here's how...
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
[rebel-builders] 10" Spinner for a McCauley O-320 prop
[rebel-builders] 10" Spinner for a McCauley O-320 prop
Has no real bearing on engine and mine is a C2A (derated B2A). This came off
an O-320-E2D with 7/16" prop bolts. Main thing is prop thickness and this
came off a McCauley that is ~ 3.5" thick and you could make thin sleeves for
each bolt, if you had 3/8 prop bolts, to fill the gap/center the front
bulkhead.
Wayne
----- Original Message -----
From: "mike jones" <mfj@cogeco.ca>
To: <rebel-builders@dcsol.com>
Sent: Saturday, January 19, 2008 10:32 PM
Subject: RE: [rebel-builders] 10" Spinner for a McCauley O-320 prop
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
an O-320-E2D with 7/16" prop bolts. Main thing is prop thickness and this
came off a McCauley that is ~ 3.5" thick and you could make thin sleeves for
each bolt, if you had 3/8 prop bolts, to fill the gap/center the front
bulkhead.
Wayne
----- Original Message -----
From: "mike jones" <mfj@cogeco.ca>
To: <rebel-builders@dcsol.com>
Sent: Saturday, January 19, 2008 10:32 PM
Subject: RE: [rebel-builders] 10" Spinner for a McCauley O-320 prop
Hi wayne
Assume this will work for my rebel with 0-320 b2b, same engine as yours
Mike#007
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Wayne
G. O'Shea
Sent: Friday, January 18, 2008 11:50 PM
To: Murphy Rebel Builders List
Subject: [rebel-builders] 10" Spinner for a McCauley O-320 prop
Anyone needs one... I've got one up on ebay. Would work well with the nose
bowl and doors cowling on a Rebel. Wayne
http://cgi.ebay.ca/ws/eBayISAPI.dll?Vie ... 8&ssPageNa
me=STRK:MESE:IT&ih=013
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
[rebel-builders] 10" Spinner for a McCauley O-320 prop
My prop flange has the larger size bolts, 7/16 I believe maybe cause it's
factory 160 hp, maybe bid on it, thanks
mike
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Wayne
G. O'Shea
Sent: Sunday, January 20, 2008 12:49 AM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] 10" Spinner for a McCauley O-320 prop
Has no real bearing on engine and mine is a C2A (derated B2A). This came off
an O-320-E2D with 7/16" prop bolts. Main thing is prop thickness and this
came off a McCauley that is ~ 3.5" thick and you could make thin sleeves for
each bolt, if you had 3/8 prop bolts, to fill the gap/center the front
bulkhead.
Wayne
----- Original Message -----
From: "mike jones" <mfj@cogeco.ca>
To: <rebel-builders@dcsol.com>
Sent: Saturday, January 19, 2008 10:32 PM
Subject: RE: [rebel-builders] 10" Spinner for a McCauley O-320 prop
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
factory 160 hp, maybe bid on it, thanks
mike
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Wayne
G. O'Shea
Sent: Sunday, January 20, 2008 12:49 AM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] 10" Spinner for a McCauley O-320 prop
Has no real bearing on engine and mine is a C2A (derated B2A). This came off
an O-320-E2D with 7/16" prop bolts. Main thing is prop thickness and this
came off a McCauley that is ~ 3.5" thick and you could make thin sleeves for
each bolt, if you had 3/8 prop bolts, to fill the gap/center the front
bulkhead.
Wayne
----- Original Message -----
From: "mike jones" <mfj@cogeco.ca>
To: <rebel-builders@dcsol.com>
Sent: Saturday, January 19, 2008 10:32 PM
Subject: RE: [rebel-builders] 10" Spinner for a McCauley O-320 prop
http://cgi.ebay.ca/ws/eBayISAPI.dll?Vie ... 8&ssPageNaHi wayne
Assume this will work for my rebel with 0-320 b2b, same engine as yours
Mike#007
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Wayne
G. O'Shea
Sent: Friday, January 18, 2008 11:50 PM
To: Murphy Rebel Builders List
Subject: [rebel-builders] 10" Spinner for a McCauley O-320 prop
Anyone needs one... I've got one up on ebay. Would work well with the nose
bowl and doors cowling on a Rebel. Wayne
me=STRK:MESE:IT&ih=013
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------