Thanks Roger
I sent off an e-mail to MAM. We'll see what they say.
John
rognal@dcsol.com wrote:
Hi John,
When I was rigging my control surfaces I asked Murphy Tech for the correct
ranges. They sent me a PDF file titled 'CONTROL SURFACE DEFLECTION GUIDE'
for the Rebel. It is not on any official letterhead or even identified as a
Murphy Aircraft Mfg. document, but since I got it from them I call it
'official'. At the time I asked if I could post the document to the
builder's list, but they pooh poohed the idea saying it was a document in
progress. You might want to ask them for a copy.
Hope this helps,
Roger Hoffman
Eugene, OR USA!
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
John Peterson
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Do you want this big green box to go away? Well here's how...
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
[rebel-builders] Re: MDRA Inspection 295R
[rebel-builders] Re: MDRA Inspection 295R
If you get one via email, I would like a copy as I am
approaching first flight. I had first engine start on
October 27th, however, I have a lot to do on the inside.
Thanks.
Gary Gustafson 242R
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of John
Peterson
Sent: Sunday, December 23, 2007 8:31 AM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Re: MDRA Inspection 295R
Thanks Roger
I sent off an e-mail to MAM. We'll see what they say.
John
rognal@dcsol.com wrote:
Hi John,
When I was rigging my control surfaces I asked Murphy Tech for the correct
ranges. They sent me a PDF file titled 'CONTROL SURFACE DEFLECTION GUIDE'
for the Rebel. It is not on any official letterhead or even identified as a
Murphy Aircraft Mfg. document, but since I got it from them I call it
'official'. At the time I asked if I could post the document to the
builder's list, but they pooh poohed the idea saying it was a document in
progress. You might want to ask them for a copy.
Hope this helps,
Roger Hoffman
Eugene, OR USA!
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
John Peterson
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
approaching first flight. I had first engine start on
October 27th, however, I have a lot to do on the inside.
Thanks.
Gary Gustafson 242R
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of John
Peterson
Sent: Sunday, December 23, 2007 8:31 AM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Re: MDRA Inspection 295R
Thanks Roger
I sent off an e-mail to MAM. We'll see what they say.
John
rognal@dcsol.com wrote:
Hi John,
When I was rigging my control surfaces I asked Murphy Tech for the correct
ranges. They sent me a PDF file titled 'CONTROL SURFACE DEFLECTION GUIDE'
for the Rebel. It is not on any official letterhead or even identified as a
Murphy Aircraft Mfg. document, but since I got it from them I call it
'official'. At the time I asked if I could post the document to the
builder's list, but they pooh poohed the idea saying it was a document in
progress. You might want to ask them for a copy.
Hope this helps,
Roger Hoffman
Eugene, OR USA!
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
John Peterson
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------