engine mount braquet...
Posted: Sun Feb 19, 2012 4:10 pm
Hello,
When I fitted fus-86 in fus-85 for the top engine mount bolt, the angle of fus 86
was perfect, I just needed to trim fus85 as per manual. But for the bottom ones,
the angle is to important, did I miss something or if I have to trim the fus 86
also?
Jean
Rebel 747R
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
When I fitted fus-86 in fus-85 for the top engine mount bolt, the angle of fus 86
was perfect, I just needed to trim fus85 as per manual. But for the bottom ones,
the angle is to important, did I miss something or if I have to trim the fus 86
also?
Jean
Rebel 747R
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------