[rebel-builders] Rebel - Rudder Spar Question

Bob Patterson · Post by **Bob Patterson** » Sun Feb 19, 2012 4:05 pm

Hi Craig !

If you build the stab first, you can see how much space is
open for the elevators .... ;-) :-)

Other than that, it might be good to order a new manual
on CD - just so you'll know what the current spec is.

--
......bobp
http://www.prosumers.ca
http://bpatterson.qhealthbeauty.com
http://apatterson2.qhealthzone.com
http://apatterson2.ordermygift.com

-------------------------------orig.-------------------------
On Saturday 03 November 2007 04:25, Craig Walls wrote:
[quote]Hi fellas!

I

Craig Walls · Post by **Craig Walls** » Sun Feb 19, 2012 4:05 pm

Didn't think of that. I'll probably do both. And hey, it was good talking
with you today. Thanks for the tips. Craig

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Bob
Patterson
Sent: Friday, November 02, 2007 8:29 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Rebel - Rudder Spar Question

Hi Craig !

If you build the stab first, you can see how much space is
open for the elevators .... ;-) :-)

Other than that, it might be good to order a new manual
on CD - just so you'll know what the current spec is.

--
......bobp
http://www.prosumers.ca
http://bpatterson.qhealthbeauty.com
http://apatterson2.qhealthzone.com
http://apatterson2.ordermygift.com

-------------------------------orig.-------------------------
On Saturday 03 November 2007 04:25, Craig Walls wrote:
[quote]Hi fellas!

I

tasack · Post by **tasack** » Sun Feb 19, 2012 4:05 pm

Bob, I don't know if you remember me, but my name is Susan Sack, wife of
deceased Terry Sack. I would like to be removed from the Rebel Builder
website and I'm not certain how to do it. Can you remove Terry's e-mail
address, tasack@columbus.rr.com for me? If not, could you tell me how to
do it? Thanks, Susan

----- Original Message -----
From: "Bob Patterson" <beep@sympatico.ca>
To: <rebel-builders@dcsol.com>
Sent: Friday, November 02, 2007 11:29 PM
Subject: Re: [rebel-builders] Rebel - Rudder Spar Question

Hi Craig !

If you build the stab first, you can see how much space is
open for the elevators .... ;-) :-)

Other than that, it might be good to order a new manual
on CD - just so you'll know what the current spec is.

--
......bobp
http://www.prosumers.ca
http://bpatterson.qhealthbeauty.com
http://apatterson2.qhealthzone.com
http://apatterson2.ordermygift.com

-------------------------------orig.-------------------------
On Saturday 03 November 2007 04:25, Craig Walls wrote:
Hi fellas!

I'm building the rudder now and have hit a little stumbling block. My

kit

is a '92. (207) I'm at the part where you cut the rudder/elevator

spars

to length. In the manual, there's a one page update put in by the

owner dated 7/27/94 which says to cut the spars to 46

Bob Patterson · Post by **Bob Patterson** » Sun Feb 19, 2012 4:05 pm

Hi Susan !

I've unsubscribed you - you should get a confirming email
soon.

We remember you both - we were at Sun 'n Fun, and were
surprised and saddened when we found out it was Terry .....

I'm glad your Rebel went to a good home. Maybe one day,
you will get to see it flying - maybe even go for a flight ....

All the best !

--
......bobp & Anna
http://www.prosumers.ca
http://bpatterson.qhealthbeauty.com
http://apatterson2.qhealthzone.com
http://apatterson2.ordermygift.com

-------------------------------orig.-------------------------
On Saturday 03 November 2007 21:35, tasack wrote:

Bob, I don't know if you remember me, but my name is Susan Sack, wife of
deceased Terry Sack. I would like to be removed from the Rebel Builder
website and I'm not certain how to do it. Can you remove Terry's e-mail
address, tasack@columbus.rr.com for me? If not, could you tell me how to
do it? Thanks, Susan

----- Original Message -----
From: "Bob Patterson" <beep@sympatico.ca>
To: <rebel-builders@dcsol.com>
Sent: Friday, November 02, 2007 11:29 PM
Subject: Re: [rebel-builders] Rebel - Rudder Spar Question

Hi Craig !

If you build the stab first, you can see how much space is
open for the elevators .... ;-) :-)

Other than that, it might be good to order a new manual
on CD - just so you'll know what the current spec is.

--
......bobp
http://www.prosumers.ca
http://bpatterson.qhealthbeauty.com
http://apatterson2.qhealthzone.com
http://apatterson2.ordermygift.com

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Robert Johnson · Post by **Robert Johnson** » Sun Feb 19, 2012 4:05 pm

Of course I remember you Susan. I could never forget the great hospitality
and genuine warm reception to Joe and I on our visit. By you just sending
this "e" mail, you should be removed from the list. - Right Mike??? - Bob
Johnson
----- Original Message -----
From: "tasack" <tasack@columbus.rr.com>
To: <rebel-builders@dcsol.com>
Sent: Saturday, November 03, 2007 4:35 PM
Subject: Re: [rebel-builders] Rebel - Rudder Spar Question

Bob, I don't know if you remember me, but my name is Susan Sack, wife of
deceased Terry Sack. I would like to be removed from the Rebel Builder
website and I'm not certain how to do it. Can you remove Terry's e-mail
address, tasack@columbus.rr.com for me? If not, could you tell me how to
do it? Thanks, Susan

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------