The Murphy Builders Site

Posted: **Sun Feb 19, 2012 3:56 pm**

Hi Craig,

So far I have completed the tail feathers and am starting on the wings. I have used:

300 Silver
300 Copper
25 Gold

and have not run out yet. I expect to have to stock up on more when I build a wing.

Best Wishes,
Rich

----- Original Message ----
From: Craig Walls <snowyrvr@mtaonline.net>
To: rebel-builders@dcsol.com
Sent: Tuesday, September 25, 2007 12:43:44 AM
Subject: [rebel-builders] Cleco Question

Anyone know which clecos we'll use the most of at any one time building our
rebel? And what's a good number to have on hand for each size? Please
don't say "you can't have enough"!! Thanks Craig

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Sun Feb 19, 2012 3:56 pm**

I have 400 of both 3/32" and 1/8". Wing is where you need them. 400 is
not to much! If you can have some of the short type, they are more
expensive but... sometime very appreci...

Jean Rebel 747R

Jean Poirier
Pr

Posted: **Sun Feb 19, 2012 3:56 pm**

At 08:43 PM 9/24/2007 -0800, you wrote:

Anyone know which clecos we'll use the most of at any one time building our
rebel? And what's a good number to have on hand for each size? Please
don't say "you can't have enough"!! Thanks Craig

The wing is the big user. If you plan carefully you can use a mix of silver
and copper and get away with a couple hundred of each. When you're ordering
also get a dozen or 25 black 5/32" ones for when you screw up.
Drew

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Sun Feb 19, 2012 3:56 pm**

Thanks to all for the cleco answers. According to my plans, I should be
able to start the plane by the end of this month!! :)

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Drew
Dalgleish
Sent: Tuesday, September 25, 2007 7:16 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Cleco Question

At 08:43 PM 9/24/2007 -0800, you wrote:

Anyone know which clecos we'll use the most of at any one time building our
rebel? And what's a good number to have on hand for each size? Please
don't say "you can't have enough"!! Thanks Craig

The wing is the big user. If you plan carefully you can use a mix of silver
and copper and get away with a couple hundred of each. When you're ordering
also get a dozen or 25 black 5/32" ones for when you screw up.
Drew

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Sun Feb 19, 2012 3:56 pm**

Hi Mike !

Interesting question !!!

Apparently, the Cleco trademark is over 113 years old !!
It belongs to Cooper Tools, of Houston, TX ... Seems like the
original manufacturer might have been a spin-off company
from the Central Louisiana Electric Company !!!!

I think you are right - it's a former brand name that has
become part of the language ! Anybody got more info ???

--
......bobp
http://www.prosumers.ca
http://bpatterson.qhealthbeauty.com
http://apatterson2.qhealthzone.com
http://apatterson2.ordermygift.com

-------------------------------orig.-------------------------
On Wednesday 26 September 2007 19:41, Mike Kimball wrote:

I agree with the 300-400 number for #40 and #30. You need a lot less #10.
I only have a small bag of those, probably less than 50. I have a small
bag of #20 as well for those #30 holes you are going to mess up. I also
have a handful of long clecoes which are needed here and there. A half
dozen or so of the high tension wingnut clecoes (PWN Series) would have
been nice when I was doing the wing spars but I managed without them. I
like this website
(http://www.panamericantool.com/family.c ... 0FASTENERS) for
seeing all the different kinds of clecoes. Regular clecoes are only $0.35
each so the prices aren't out of line there either.

Mike

P.S. I wonder if Cleco was once a brand name and is now used to describe
the fastener no matter who makes it. Like "Kleenex".

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Craig
Walls
Sent: Monday, September 24, 2007 8:44 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] Cleco Question

Anyone know which clecos we'll use the most of at any one time building our
rebel? And what's a good number to have on hand for each size? Please
don't say "you can't have enough"!! Thanks Craig

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------