[rebel-builders] need a info...
Posted: Sun Feb 19, 2012 3:56 pm
Hello
I ma looking at a rebel kit with a Subaru engine.
Would appreciate any words of wisdom/caution regarding what to look for.
I will be out of touch until Monday, so thank you in advance for any advice.
Thanks,
Mike
-------------- Original message --------------
From: <jean.poirier@oxyportneuf.com>
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
I ma looking at a rebel kit with a Subaru engine.
Would appreciate any words of wisdom/caution regarding what to look for.
I will be out of touch until Monday, so thank you in advance for any advice.
Thanks,
Mike
-------------- Original message --------------
From: <jean.poirier@oxyportneuf.com>
Hello
I am ready to assy the fus-39 and fus 40. All the floor channel are done. I
will
make the cabin floor with a lexan (as a template) like I did for the rear floor.
The question is:
Do I rivet the fus-40 to the rear fus-5 now? is the front floor fus-3 will be
riveted to the front fus-5 or to both fus-5?
Jean
Rebel 747R
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------