[rebel-builders] windscrean retainer
Posted: Sun Feb 19, 2012 12:12 pm
From what I remember. No holes in plexiglass. Use the wide side for the
screw holes to the fuse.
Mike Betti
----- Original Message -----
From: "Jones, Michael" <Michael.Jones@snclavalin.com>
To: <rebel-builders@dcsol.com>
Sent: Monday, July 09, 2007 2:09 PM
Subject: [rebel-builders] windscrean retainer
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
screw holes to the fuse.
Mike Betti
----- Original Message -----
From: "Jones, Michael" <Michael.Jones@snclavalin.com>
To: <rebel-builders@dcsol.com>
Sent: Monday, July 09, 2007 2:09 PM
Subject: [rebel-builders] windscrean retainer
so with the murphy supplied metal top and side retainer brackets which
side
is over window, the narrow or the wide side
also i assume no holes should go through the wind screan and munting
screws
only go through the metal retainer brackets
thanks
mike#007
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------