[rebel-builders] Rebel Stab Material Thickness
Posted: Sun Feb 19, 2012 12:04 pm
Occasionally the total number of messages displayed gets messed up, but they
are still there. When I checked after reading this, it only showed 29
messages in the rebel list, but when I clicked on the list it showed a high
message number of 32,008.
Anyway, I have run the repair tool on the database to reset the counter, and
it now shows 31,994 messages in the rebel builders list.
Despite the error in reporting the number of messages in the database, it
should not have affected your search.
Mike
----- Original Message -----
From: "Rich Dodson" <r_dodson@yahoo.com>
To: "Rebel Listserve" <rebel-builders@dcsol.com>
Sent: Monday, May 14, 2007 12:47 PM
Subject: [rebel-builders] Rebel Stab Material Thickness
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
are still there. When I checked after reading this, it only showed 29
messages in the rebel list, but when I clicked on the list it showed a high
message number of 32,008.
Anyway, I have run the repair tool on the database to reset the counter, and
it now shows 31,994 messages in the rebel builders list.
Despite the error in reporting the number of messages in the database, it
should not have affected your search.
Mike
----- Original Message -----
From: "Rich Dodson" <r_dodson@yahoo.com>
To: "Rebel Listserve" <rebel-builders@dcsol.com>
Sent: Monday, May 14, 2007 12:47 PM
Subject: [rebel-builders] Rebel Stab Material Thickness
Gents,
Tried searching the archives on this but it looks like the server dumped
all the previous threads about a month ago?
So I am beginning to lose sleep over this one. The stab. skins for the
Rebel are .016 (which I know most of you know already). I am now clecoing
up the second stab (the left). The first stab (the right) is ready for
priming and then closure. Those skins, even when nice and tight on the
frame, are REALLY thin from my perspective. The leading edge is both
thicker, and bent, and stout, but the tops and bottoms have me worried.
Please help me.
Just tell me that .016 is good enough and I will stop worrying. My plane
will not go on floats, and it will have an O-235-L2C (125 hp) engine in
it.
Thanks!
Rich
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------