[rebel-builders] Moose - FUS-0370
Posted: Sun Feb 19, 2012 12:04 pm
Fred,
The part labeled FUS-370 in the file named H_StabMount_c.jpg (in the
archives) that you refer to is one of two "FRONT STAB MOUNT" parts as
labeled with #19 on the diagram on page 6 of 24 in chapter 9.1 "SR3500
Fuselage Assembly." I had an extra set of these, so I used one for the
reinforcing bracket you see in this photo.
Email if you have more questions,
Ted Waltman
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Fred
Messinger (fredm)
Sent: Tuesday, April 10, 2007 7:31 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Moose - New V-Brace design
Hi All,
I notice a FUS-370 in some pictures recvently uploaded pictures - they
mainly pertained to the tail cone. Did this part come from MAM? I got my
moose in August and I don't even have that part on my inventory list.
Thanks,
Fred
On 3/31/07, Ted Waltman <tedwaltman@i1ci.com> wrote:
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
The part labeled FUS-370 in the file named H_StabMount_c.jpg (in the
archives) that you refer to is one of two "FRONT STAB MOUNT" parts as
labeled with #19 on the diagram on page 6 of 24 in chapter 9.1 "SR3500
Fuselage Assembly." I had an extra set of these, so I used one for the
reinforcing bracket you see in this photo.
Email if you have more questions,
Ted Waltman
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Fred
Messinger (fredm)
Sent: Tuesday, April 10, 2007 7:31 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Moose - New V-Brace design
Hi All,
I notice a FUS-370 in some pictures recvently uploaded pictures - they
mainly pertained to the tail cone. Did this part come from MAM? I got my
moose in August and I don't even have that part on my inventory list.
Thanks,
Fred
On 3/31/07, Ted Waltman <tedwaltman@i1ci.com> wrote:
I just uploaded two pictures to S/M 107-Fuselage of a new FUS-0717,
V-Brace,
design by Dale Fultz (thanks Dale!). I annotated the pictures with the
measurements of all the components. All are of 4130 except for the
washer,
which is stainless. The design uses 3/8" bolts.
Ted Waltman
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------