[rebel-builders] fus10 vs fus 70
Posted: Sun Feb 19, 2012 11:56 am
Hi Jean: My Rebel has the same as what your saying but I doubled up with
.016 material behind the rear gear leg (drag brace) and will do same for the
top behind the firewall and use the Fus 70's for the bottom. Bob J
----- Original Message -----
From: <jean.poirier@oxyportneuf.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, March 13, 2007 6:37 PM
Subject: [rebel-builders] fus10 vs fus 70
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
.016 material behind the rear gear leg (drag brace) and will do same for the
top behind the firewall and use the Fus 70's for the bottom. Bob J
----- Original Message -----
From: <jean.poirier@oxyportneuf.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, March 13, 2007 6:37 PM
Subject: [rebel-builders] fus10 vs fus 70
The top rear and bottom are in place, the 2 last one should go in the
firewall area (in top) and the 2 fus-70 at the bottom.
A "blind" builder
Jean
Rebel 747R
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------