fus10 vs fus 70
Posted: Sun Feb 19, 2012 11:56 am
How bad is the fus10 installation is still not very clear for me. MAM supply 6x FUS-10 and 2x FUS-70. The 2 fus-70 go between the fire wall
and the cabine frame. Is the "must replace " was for at the origin just for those 2 and than evoluate in "all must be change". Some talk
about fus-452? Is it the same part with .032 instead .020 and .025? It look easier to fit a seconf fus-10 as a doubler thant to work
with .032"...
The top rear and bottom are in place, the 2 last one should go in the firewall area (in top) and the 2 fus-70 at the bottom.
A "blind" builder
Jean
Rebel 747R
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
and the cabine frame. Is the "must replace " was for at the origin just for those 2 and than evoluate in "all must be change". Some talk
about fus-452? Is it the same part with .032 instead .020 and .025? It look easier to fit a seconf fus-10 as a doubler thant to work
with .032"...
The top rear and bottom are in place, the 2 last one should go in the firewall area (in top) and the 2 fus-70 at the bottom.
A "blind" builder
Jean
Rebel 747R
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------