fus-70 vs fus-10
Posted: Sun Feb 19, 2012 11:56 am
Hello
The modifiation table show on the #40: All 8 corner wraps ( 6 x fus-10 and 2 x fus-70 include with the kit) should be fus-70... the 2 rear top
corner already done with fus-10. should I change them? Should I try to fabricate fus-70 or make doubler out of .020" or if there is another
easier way to make those area stronger (if they really need it)?
Jean
Rebel 747R
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
The modifiation table show on the #40: All 8 corner wraps ( 6 x fus-10 and 2 x fus-70 include with the kit) should be fus-70... the 2 rear top
corner already done with fus-10. should I change them? Should I try to fabricate fus-70 or make doubler out of .020" or if there is another
easier way to make those area stronger (if they really need it)?
Jean
Rebel 747R
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------