The Murphy Builders Site

Hi Rob

You can try Sealants and Coatings Alberta distribuitors online.
They have Sikaflex but I don't know if you need a special grade.
http://www.sealantsandcoatings.com/dist ... /index.cfm

Nancy Puff

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Robert Johnson
Sent: Thursday, March 08, 2007 5:36 AM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] Sikaflex 292

Hi guys and gals: Great success with the Moose quick build R.H. wing.
The tank (extended) had no leaks. I temp sealed the six access hatches
with a vinyl tape and tested for a day. After opening up the hatches I
was really impressed with the neatness inside with the proseal fillets
all around. Hopefully the L.H. will be as good. I am now in the process
of mounting the McKenzie STOL cuffs but the SikaFlex 292 is no longer
usable - old and dried up in the sealed container. Maybe it has to do
with the "best before Nov 2004" date. - Ha Ha. Does anyone know of a
Canadian (Ontario) supplier. Local stores do not carry it and the
Marinas are not yet open. Thanks - Bob J



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login username
"rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Hi Bob Sikaflex 1A is the construction equivilent to the marine grade. You
should be able to get it at some building suppliers. If not there's a guy
in Goderich that stocks the marine grade.

At 08:36 AM 3/8/2007 -0500, you wrote:

Hi guys and gals: Great success with the Moose quick build R.H. wing. The

tank (extended) had no leaks. I temp sealed the six access hatches with a
vinyl tape and tested for a day. After opening up the hatches I was really
impressed with the neatness inside with the proseal fillets all around.
Hopefully the L.H. will be as good. I am now in the process of mounting the
McKenzie STOL cuffs but the SikaFlex 292 is no longer usable - old and
dried up in the sealed container. Maybe it has to do with the "best before
Nov 2004" date. - Ha Ha. Does anyone know of a Canadian (Ontario) supplier.
Local stores do not carry it and the Marinas are not yet open. Thanks - Bob J

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Drew



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Yep as Drew points out 1A is the construction equivalent and no matter how
many times I've read the chemical specs...there is no difference between 1A
and 292. I use 1A to build floats. There is also a generic out at the lumber
yards. It's just called Sikaflex with no designator (yellow tube..available
in grey and limeston) and best I can tell in the way it cured and
reacts...it's the same as 1a as well. Any of these will definitely suffice
to mount Angus's "ribs".

----- Original Message -----
From: "Drew Dalgleish" <drewjan@cabletv.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Thursday, March 08, 2007 10:59 AM
Subject: Re: [rebel-builders] Sikaflex 292

Hi Bob Sikaflex 1A is the construction equivilent to the marine grade. You
should be able to get it at some building suppliers. If not there's a guy
in Goderich that stocks the marine grade.

At 08:36 AM 3/8/2007 -0500, you wrote:

Hi guys and gals: Great success with the Moose quick build R.H. wing. The

tank (extended) had no leaks. I temp sealed the six access hatches with a
vinyl tape and tested for a day. After opening up the hatches I was really
impressed with the neatness inside with the proseal fillets all around.
Hopefully the L.H. will be as good. I am now in the process of mounting
the
McKenzie STOL cuffs but the SikaFlex 292 is no longer usable - old and
dried up in the sealed container. Maybe it has to do with the "best before
Nov 2004" date. - Ha Ha. Does anyone know of a Canadian (Ontario)
supplier.
Local stores do not carry it and the Marinas are not yet open. Thanks -
Bob J

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Drew



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Hi Bob !

I think Jack Weibe found some at a hardware distributor
near Hamilton - maybe you could give him a call ...

--
......bobp
http://www.prosumers.ca
http://bpatterson.qhealthbeauty.com
http://apatterson2.qhealthzone.com

-------------------------------orig.-------------------------
On Thursday 08 March 2007 13:36, Robert Johnson wrote:

Hi guys and gals: Great success with the Moose quick build R.H. wing. The

tank (extended) had no leaks. I temp sealed the six access hatches with a
vinyl tape and tested for a day. After opening up the hatches I was really
impressed with the neatness inside with the proseal fillets all around.
Hopefully the L.H. will be as good. I am now in the process of mounting the
McKenzie STOL cuffs but the SikaFlex 292 is no longer usable - old and dried
up in the sealed container. Maybe it has to do with the "best before Nov
2004" date. - Ha Ha. Does anyone know of a Canadian (Ontario) supplier. Local
stores do not carry it and the Marinas are not yet open. Thanks - Bob J




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------