The Murphy Builders Site

Helping a buddy with his windshield on his Elite. He has a Superior 0-360
180 hp and a high speed cowl. The airbox supplied with the firewall kit,
when mounted to the carb, is offset about 1 1/2" to the port side of the
inlet hole. Anyone else experience this and what did you do for a good fit
other than re-work the front of the airbox? Thanks to those that respond.

Steve W 637R

_________________________________________________________________
Buy what you want when you want it on Sympatico / MSN Shopping
http://shopping.sympatico.msn.ca/conten ... ata=081805




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Helping a buddy with his windshield on his Elite. He has a Superior 0-360
180 hp and a high speed cowl. The airbox supplied with the firewall kit,
when mounted to the carb, is offset about 1 1/2" to the port side of the
inlet hole. Anyone else experience this and what did you do for a good fit
other than re-work the front of the airbox? Thanks to those that respond.

Steve W 637R

_________________________________________________________________
Buy what you want when you want it on Sympatico / MSN Shopping

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

My Superior O-360 just arrived today. Wayne, could I get a copy of those
pics as well? And is the airbox from Murphy or from Vans?

Many thanks.

Eric
645E

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Wayne
G. O'Shea
Sent: Tuesday, February 27, 2007 8:01 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Re: Elite 0-360 Carb Intake

Guy that built Bob White's Elite, that I have here, riveted alum and
angled
it off the original filter location to line up with the cowl hole. Lined
edges of the addition with silcon baffle seal. Sent you a couple pics
direct.

Wayne

----- Original Message -----
From: "steve whitenect" <srwhitenect@hotmail.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, February 27, 2007 10:42 PM
Subject: [rebel-builders] Re: Elite 0-360 Carb Intake

Helping a buddy with his windshield on his Elite. He has a Superior
0-360
180 hp and a high speed cowl. The airbox supplied with the firewall kit,
when mounted to the carb, is offset about 1 1/2" to the port side of the
inlet hole. Anyone else experience this and what did you do for a good
fit
other than re-work the front of the airbox? Thanks to those that respond.

Steve W 637R

_________________________________________________________________
Buy what you want when you want it on Sympatico / MSN Shopping

http://shopping.sympatico.msn.ca/conten ... nrdata=081
805

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
Reply-To: <rebel-builders@dcsol.com>
To: <rebel-builders@dcsol.com>
Subject: Re: [rebel-builders] Re: Elite 0-360 Carb Intake
Date: Tue, 27 Feb 2007 23:00:38 -0500

Guy that built Bob White's Elite, that I have here, riveted alum and angled
it off the original filter location to line up with the cowl hole. Lined
edges of the addition with silcon baffle seal. Sent you a couple pics
direct.

Wayne

----- Original Message -----
From: "steve whitenect" <srwhitenect@hotmail.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, February 27, 2007 10:42 PM
Subject: [rebel-builders] Re: Elite 0-360 Carb Intake

Helping a buddy with his windshield on his Elite. He has a Superior

0-360

180 hp and a high speed cowl. The airbox supplied with the firewall

kit,

when mounted to the carb, is offset about 1 1/2" to the port side of the
inlet hole. Anyone else experience this and what did you do for a good

fit

other than re-work the front of the airbox? Thanks to those that

respond.

Steve W 637R

_________________________________________________________________
Buy what you want when you want it on Sympatico / MSN Shopping

http://shopping.sympatico.msn.ca/conten ... ata=081805

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Hi Wayne and thanks to all that responded. I will probably weld up the
front of his airbox to put the filter behind the intake and angle the rest
toward the carb. Didn't get the pics?!

Steve W 637R

From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
Reply-To: <rebel-builders@dcsol.com>
To: <rebel-builders@dcsol.com>
Subject: Re: [rebel-builders] Re: Elite 0-360 Carb Intake
Date: Tue, 27 Feb 2007 23:00:38 -0500

Guy that built Bob White's Elite, that I have here, riveted alum and
angled
it off the original filter location to line up with the cowl hole. Lined
edges of the addition with silcon baffle seal. Sent you a couple pics
direct.

Wayne

----- Original Message -----
From: "steve whitenect" <srwhitenect@hotmail.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, February 27, 2007 10:42 PM
Subject: [rebel-builders] Re: Elite 0-360 Carb Intake

Helping a buddy with his windshield on his Elite. He has a Superior

0-360

180 hp and a high speed cowl. The airbox supplied with the firewall

kit,

when mounted to the carb, is offset about 1 1/2" to the port side of
the
inlet hole. Anyone else experience this and what did you do for a good

fit

other than re-work the front of the airbox? Thanks to those that

respond.

Steve W 637R

_________________________________________________________________
Buy what you want when you want it on Sympatico / MSN Shopping

http://shopping.sympatico.msn.ca/conten ... ata=081805

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

_________________________________________________________________
Your Space. Your Friends. Your Stories. Share your world with Windows Live
Spaces. http://spaces.live.com/?mkt=en-ca




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
Reply-To: <rebel-builders@dcsol.com>
To: <rebel-builders@dcsol.com>
Subject: Re: [rebel-builders] Re: Elite 0-360 Carb Intake
Date: Wed, 28 Feb 2007 11:49:34 -0500

Sent them last night immediately after I posted to the list. Will check if
your address is now different and send again.

----- Original Message -----
From: "steve whitenect" <srwhitenect@hotmail.com>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, February 28, 2007 11:33 AM
Subject: Re: [rebel-builders] Re: Elite 0-360 Carb Intake

Hi Wayne and thanks to all that responded. I will probably weld up the
front of his airbox to put the filter behind the intake and angle the

rest

toward the carb. Didn't get the pics?!

Steve W 637R

From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
Reply-To: <rebel-builders@dcsol.com>
To: <rebel-builders@dcsol.com>
Subject: Re: [rebel-builders] Re: Elite 0-360 Carb Intake
Date: Tue, 27 Feb 2007 23:00:38 -0500

Guy that built Bob White's Elite, that I have here, riveted alum and
angled
it off the original filter location to line up with the cowl hole. Lined
edges of the addition with silcon baffle seal. Sent you a couple pics
direct.

Wayne

----- Original Message -----
From: "steve whitenect" <srwhitenect@hotmail.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, February 27, 2007 10:42 PM
Subject: [rebel-builders] Re: Elite 0-360 Carb Intake

0-360 kit,

good

fit respond. http://shopping.sympatico.msn.ca/conten ... ata=081805


-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

_________________________________________________________________
Your Space. Your Friends. Your Stories. Share your world with Windows

Live

Spaces. http://spaces.live.com/?mkt=en-ca




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Same address at srwhitenect@hotmail.com

Steve

From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
Reply-To: <rebel-builders@dcsol.com>
To: <rebel-builders@dcsol.com>
Subject: Re: [rebel-builders] Re: Elite 0-360 Carb Intake
Date: Wed, 28 Feb 2007 11:49:34 -0500

Sent them last night immediately after I posted to the list. Will check if
your address is now different and send again.

----- Original Message -----
From: "steve whitenect" <srwhitenect@hotmail.com>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, February 28, 2007 11:33 AM
Subject: Re: [rebel-builders] Re: Elite 0-360 Carb Intake

Hi Wayne and thanks to all that responded. I will probably weld up the
front of his airbox to put the filter behind the intake and angle the

rest

toward the carb. Didn't get the pics?!

Steve W 637R

good

_________________________________________________________________
Your Space. Your Friends. Your Stories. Share your world with Windows

Live

Spaces. http://spaces.live.com/?mkt=en-ca




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

_________________________________________________________________
http://local.live.com/default.aspx?v=2& ... 919B4!1329




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

From: "Dale Fultz" <dfultz17086@earthlink.net>
Reply-To: <rebel-builders@dcsol.com>
To: <rebel-builders@dcsol.com>
Subject: Re: [rebel-builders] Re: Elite 0-360 Carb Intake
Date: Wed, 28 Feb 2007 17:42:11 -0500

Steve,,, some would probably classify it as junk mail.. My wife says she is
a MOOSE widower. All she keeps saying now is I hope it's soon done.. Dale
SR-033 N269DF
-----




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------