[rebel-builders] Rebel Interior - Door/Window
Posted: Sun Feb 19, 2012 11:52 am
Hi Gary: I had made up a curved plate riveted to the top of the window frame
which served as both the square slot the latch snapped into and a finger
pull to close. Sorry I do not have a detailed picture after checking my
files. Bob J
----- Original Message -----
From: "Gary Gustafson" <gargus@adelphia.net>
To: <rebel-builders@dcsol.com>
Sent: Saturday, February 24, 2007 1:25 PM
Subject: [rebel-builders] Rebel Interior - Door/Window
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
which served as both the square slot the latch snapped into and a finger
pull to close. Sorry I do not have a detailed picture after checking my
files. Bob J
----- Original Message -----
From: "Gary Gustafson" <gargus@adelphia.net>
To: <rebel-builders@dcsol.com>
Sent: Saturday, February 24, 2007 1:25 PM
Subject: [rebel-builders] Rebel Interior - Door/Window
Robert Johnson [bestofbo@cogeco.ca]
Now I am wondering how you close the window from the inside.
This is a general question and I am curious as to what
means that people use to close the window (in standard Murphy
configuration) to pull the window up and hold it in when
closing. I have seen one picture of a pull strap mounted to
the frame. What other approaches have people found convenient?
Gary Gustafson
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------