need infos...
Posted: Sun Feb 19, 2012 11:52 am
Hello
1- On Fus-3 between the 2 Gusset # fus-1, the manual ask to drill #30 for rivets. How do you debur inside the tube?
2- Because the top (fus-23), is in sandwich between the gussets (fus-1) and the tube (fus-3), the gussets are not 100% mating with the
tube, the top flange is "too short". I hope you understand, I do not know how to clear on that in english....
3- Manual ask for dimple the top on the fuselage root ribs (fus-27), do I have to dimple in the angle (fus-35) or not?
Thanks
Jean
Rebel 747R
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
1- On Fus-3 between the 2 Gusset # fus-1, the manual ask to drill #30 for rivets. How do you debur inside the tube?
2- Because the top (fus-23), is in sandwich between the gussets (fus-1) and the tube (fus-3), the gussets are not 100% mating with the
tube, the top flange is "too short". I hope you understand, I do not know how to clear on that in english....
3- Manual ask for dimple the top on the fuselage root ribs (fus-27), do I have to dimple in the angle (fus-35) or not?
Thanks
Jean
Rebel 747R
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------