[rebel-builders] wing stringers
Posted: Sun Feb 19, 2012 11:43 am
Thanks Ralph. I got those special nut plates courtesy
of Wayne a few years ago and already have them
installed.
Keith
--- Ralph Baker <rebaker@sc.rr.com> wrote:
____________________________________________________________________________________
Don't get soaked. Take a quick peak at the forecast
with the Yahoo! Search weather shortcut.
http://tools.search.yahoo.com/shortcuts/#loc_weather
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
of Wayne a few years ago and already have them
installed.
Keith
--- Ralph Baker <rebaker@sc.rr.com> wrote:
-----------------------------------------------------------------Keith,
That is more than necessary. Just enough to allow
fluid flow after the ProSeal is added, 5/16" - 3/8".
That is on the wing with the flange turned out.
The other wing takes care of itself as the stringer
should not ride over the wing flange or vice versa.
Regards,
Ralph
PS - Another suggestion. Be sure to use nutplates
to attach the flap/aileron hinges in lieu of nuts
inside the wings.
-----------------------------------------------------------------List archives located at:
https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
____________________________________________________________________________________
Don't get soaked. Take a quick peak at the forecast
with the Yahoo! Search weather shortcut.
http://tools.search.yahoo.com/shortcuts/#loc_weather
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------