[rebel-builders] RE: fibreglass over masking tape?
Posted: Sun Feb 19, 2012 11:42 am
I had good results with clear 2" wide packing tape. It's smoother and
thinnner.
Ken
eric.r@dcsol.com wrote:
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
thinnner.
Ken
eric.r@dcsol.com wrote:
The short answer is ...Yes.
On 2/6/2007 5:46 AM, super_rebel131@yahoo.com wrote to rebel-builders:
-> Guys,
->
-> Can you fibreglass over masking tape without any
-> implications for releasing the glassed part? I noticed
-> on www.goflyamoose.com (windows section) that Scott
-> had used masking tape where the window meets the
-> fuselage and then masked off the rest of the cabin
-> with wax paper.
->
-> Thanks, -Jason
-
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------