Prince Props on Rebels
Posted: Sun Feb 19, 2012 11:38 am
Could the people on the list using Prince props on wheels please respond
with the diameter and pitch of what they are using. I have a 74" diam. and
45' pitch which is too fine on 150 hp. Lonnie is to replace it here in the
next few months to possibly a 47". He says that the numbers for pitch are
not to be compared with say the numbers on a metal blade. A buddy, Gill, is
to receive a 76"dia. 56" pitch for his Elite with an 0-360 at 180 hp.
This is a big difference unless Lonnie has recently changed his method of
determining his evaluation of pitch. Anone there?
Steve W 637R
_________________________________________________________________
Free Alerts
with the diameter and pitch of what they are using. I have a 74" diam. and
45' pitch which is too fine on 150 hp. Lonnie is to replace it here in the
next few months to possibly a 47". He says that the numbers for pitch are
not to be compared with say the numbers on a metal blade. A buddy, Gill, is
to receive a 76"dia. 56" pitch for his Elite with an 0-360 at 180 hp.
This is a big difference unless Lonnie has recently changed his method of
determining his evaluation of pitch. Anone there?
Steve W 637R
_________________________________________________________________
Free Alerts