[rebel-builders] fuselage root rib...
Posted: Sun Feb 19, 2012 11:38 am
Jean,
I couldn't get mine to lay flat on a table. I made the top flange as
straight as possible, and as I drilled the holes into the roof I was
carefull to keep it straight. It worked out fine.
I drilled the holes in the root rib flange first (#40) and drilled through
those from below into the roof with a long bit. That way I was sure to miss
all the flutes in the flange. I don't have a shrinker.
Jesse
Invite your Hotmail contacts to join your friends list with Windows Live
Spaces
http://clk.atdmt.com/MSN/go/msnnkwsp007 ... &mkt=en-us
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
I couldn't get mine to lay flat on a table. I made the top flange as
straight as possible, and as I drilled the holes into the roof I was
carefull to keep it straight. It worked out fine.
I drilled the holes in the root rib flange first (#40) and drilled through
those from below into the roof with a long bit. That way I was sure to miss
all the flutes in the flange. I don't have a shrinker.
Jesse
_________________________________________________________________From: <jean.poirier@oxyportneuf.com>
Reply-To: <rebel-builders@dcsol.com>
To: rebel-builders@dcsol.com
Subject: [rebel-builders] fuselage root rib...
Date: Sun, 28 Jan 2007 10:57:55 -0500
Hello,
The manual ask for straigten the top flange of both fuselage root rib so
they should lie flat when placed on a table!"/$$%. The first one is
now "flatter" but look very difficult to make it perfectly flat! Should
I visit an expert somewhere? There is much less tension at this point than
the solid ribs of the gas tank... but may be it is still too much?
Jean
Rebel 747R
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Invite your Hotmail contacts to join your friends list with Windows Live
Spaces
http://clk.atdmt.com/MSN/go/msnnkwsp007 ... &mkt=en-us
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------