[rebel-builders] rivet removal tool
Posted: Sun Feb 19, 2012 11:30 am
Jason,
I have no experience with the tool you mention. Sounds like you just need
more practice. Buck thirty or so rivets into some scrap sheet stock ... and
then drill them out. The more you do, the better you get at it.
Bob 612e
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Jason Beall
Sent: Tuesday, December 19, 2006 6:30 AM
To: new list server
Subject: [rebel-builders] rivet removal tool
Hi all,
I have some solid rivets to remove to install my tail
beef-up kit. Has anyone ever used one of the rivet
removal tools like Aircraft Spruce sells? (Part no
TP-276 on page 546 of their catalog)
I have tried drilling out solid rivets before but
almost always end up slightly enlarging the hole when
I punch the tail out.
Any advise would be appreciated.
Thanks, -Jason
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
I have no experience with the tool you mention. Sounds like you just need
more practice. Buck thirty or so rivets into some scrap sheet stock ... and
then drill them out. The more you do, the better you get at it.
Bob 612e
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Jason Beall
Sent: Tuesday, December 19, 2006 6:30 AM
To: new list server
Subject: [rebel-builders] rivet removal tool
Hi all,
I have some solid rivets to remove to install my tail
beef-up kit. Has anyone ever used one of the rivet
removal tools like Aircraft Spruce sells? (Part no
TP-276 on page 546 of their catalog)
I have tried drilling out solid rivets before but
almost always end up slightly enlarging the hole when
I punch the tail out.
Any advise would be appreciated.
Thanks, -Jason
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------