Sealant spread
Posted: Sun Feb 19, 2012 11:30 am
BTW..for those that have the Float Build CD and are wondering how I did the
sealant spread over rivet heads as shown in the pictures. I just take a wood
tongue depressor..cut it off square and then add a notch in the center just
slightly wider/deeper than a rivet head. Makes for a clean cover seal
without waste/extra weight and it's neat.
Wayne
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
sealant spread over rivet heads as shown in the pictures. I just take a wood
tongue depressor..cut it off square and then add a notch in the center just
slightly wider/deeper than a rivet head. Makes for a clean cover seal
without waste/extra weight and it's neat.
Wayne
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------