Page 1 of 1

[rebel-builders] Access panels in fuel tanks

Posted: Sun Feb 19, 2012 11:27 am
by Wayne G. O'Shea
Hopefully the guys will help you out Dale. Like I said I seal those things
shut before I even place the lower tank skin on the wing.

Wayne

----- Original Message -----
From: "Dale Fultz" <dfultz17086@earthlink.net>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, November 29, 2006 1:13 PM
Subject: [rebel-builders] Access panels in fuel tanks

What is being used on the access panels in the fuel compartments of the
wings to seal them up? Is there a proseal that is used ? I need to get
mine
sealed up to fire engine up. I emailed MAM but didn't get a reply and
didn't
see anything in the manual.. Thanks Dale SR-033




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Access panels in fuel tanks

Posted: Sun Feb 19, 2012 11:27 am
by Steve Halvorsen
Dale

Proseal the hell out of the plates and BE SURE to use the closed end revits to hold the plates on.
Key here is to get a good seal use the correct revits for the job.
If the standard revits are used the stems will leak AT SOME TIME.

Steve H
Moose 213

----- Original Message ----
From: Dale Fultz <dfultz17086@earthlink.net>
To: rebel-builders@dcsol.com
Sent: Wednesday, November 29, 2006 12:13:42 PM
Subject: [rebel-builders] Access panels in fuel tanks


What is being used on the access panels in the fuel compartments of the
wings to seal them up? Is there a proseal that is used ? I need to get mine
sealed up to fire engine up. I emailed MAM but didn't get a reply and didn't
see anything in the manual.. Thanks Dale SR-033




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------