The Murphy Builders Site

A question for all of you who have built the rudder/elevator:

How did you de-burr the 70+ rivet holes inside the rudder/elevator spar
tubes?

Any suggestions appreciated.

Thanks,

Roger #687R


*-----------------------------------------------------------------------------------*
The Murphy Rebel Builders List is for the discussion
between builders and owners of Murphy Rebel aircraft.
Archives located at:
http://www.dcsol.com/murphy-rebel/lists/default.htm
*-----------------------------------------------------------------------------------*




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Roger & Alice- When I built my units I ran very fine emery paper taped over
foam rubber(carpet underlay) which was stapled to a 3/4 dowel. The larger
end holes where easily accessible with the std. swivel deburring tool-Best
regards-Bob J. Rebel "652"
----- Original Message -----
From: Roger & Alice Hoffman <rognal@continet.com>
To: Murphy Rebel Builders List <murphy-rebel@dcsol.com>
Sent: Monday, April 10, 2000 12:26 PM
Subject: Rudder/Elevator Spars-deburring

A question for all of you who have built the rudder/elevator:

How did you de-burr the 70+ rivet holes inside the rudder/elevator spar
tubes?

Any suggestions appreciated.

Thanks,

Roger #687R

*---------------------------------------------------------------------------
--------*

The Murphy Rebel Builders List is for the discussion
between builders and owners of Murphy Rebel aircraft.
Archives located at:
http://www.dcsol.com/murphy-rebel/lists/default.htm

*---------------------------------------------------------------------------
--------*

*-----------------------------------------------------------------------------------*
The Murphy Rebel Builders List is for the discussion
between builders and owners of Murphy Rebel aircraft.
Archives located at:
http://www.dcsol.com/murphy-rebel/lists/default.htm
*-----------------------------------------------------------------------------------*




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------