The Murphy Builders Site

Posted: **Sun Feb 19, 2012 11:21 am**

Live 60 miles from Dillsburg, the bad thing now is he or I should say the
sons are buying foreign steel some is not of the same quality he had in
previous trips there. I bought the tubing there to fabricate the nose gear
on the Moose had a hard time getting it powder coated there is a substance
keeps bleeding through the coating finally got it to take as it is supposed
to do. Just my experience last spring with them. Dale SR-033

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Sun Feb 19, 2012 11:21 am**

Wayne, when I built my last tube and fab aircraft, believe it or not,
Leavens was the best price. I have bought the odd piece from them over the
last couple of years and think there definately out to lunch on their
prices. I believe I have Dillsberg's info somewheres in the house. I am a
little far away from ordering anything just yet. Have two sets of floats to
build when and if I ever get into my new house this December and then I have
to set up a shop to boot! Forget that I have to paint GMSG this spring too.

Steve W

From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
Reply-To: <rebel-builders@dcsol.com>
To: <rebel-builders@dcsol.com>
Subject: [rebel-builders] 4130 tube source - costs
Date: Mon, 30 Oct 2006 21:57:54 -0500

There's only one place to buy 4130 tube... without taking your bank
manager.
Dillsberg Aeroplane Works..from their chicken barns full of tube. If you
need the phone number I'll dig out their leaflet.

Wayne

----- Original Message -----
From: "steve whitenect" <srwhitenect@hotmail.com>
To: <rebel-builders@dcsol.com>
Sent: Monday, October 30, 2006 9:54 PM
Subject: Re: [rebel-builders] Anthem, AZ

Thanks Drew
I saw this last week when I was surfing the web. The only thing that
bothers me after researching the Bearhawk several years ago is the
extravagant landing gear and aileron/flap hinges but I understand that
someone is making some of the parts. Do u think that the raw tubing for
the
Patrol would be about or more than 3,500.US? I have not priced 4130
tubing
for quite some time but is most likely up in price. Reviews on the
plane
are very inpressive. Have a soft spot for the Maule look-a-like too!

Steve W

_________________________________________________________________
Buy, Load, Play. The new Sympatico / MSN Music Store works seamlessly
with
Windows Media Player. Just Click PLAY.

http://musicstore.sympatico.msn.ca/cont ... Sept192006

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

_________________________________________________________________
Ready for the world's first international mobile film festival celebrating
the creative potential of today's youth? Check out Mobile Jam Fest for your
a chance to WIN $10,000! www.mobilejamfest.com

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Sun Feb 19, 2012 11:21 am**

Thanks for the update Dale. Issue is everyone (suppliers) buys from them as
their father would "buy out" the whole mill run for stock.

----- Original Message -----
From: "Dale Fultz" <dfultz17086@earthlink.net>
To: <rebel-builders@dcsol.com>
Sent: Monday, October 30, 2006 10:36 PM
Subject: Re: [rebel-builders] 4130 tube source - costs

Live 60 miles from Dillsburg, the bad thing now is he or I should say the
sons are buying foreign steel some is not of the same quality he had in
previous trips there. I bought the tubing there to fabricate the nose gear
on the Moose had a hard time getting it powder coated there is a substance
keeps bleeding through the coating finally got it to take as it is
supposed
to do. Just my experience last spring with them. Dale SR-033

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Sun Feb 19, 2012 11:21 am**

Dale, isn't that just a preservative that they put on that's really hard to
remove? I remember washing the tubing with varsol for ever to get it clean.
You know its clean when it rusts in several hours after touching it. If they
put it on when the metal is still hot, it almost comes out like a blueing?.

Steve w.

From: "Dale Fultz" <dfultz17086@earthlink.net>
Reply-To: <rebel-builders@dcsol.com>
To: <rebel-builders@dcsol.com>
Subject: Re: [rebel-builders] 4130 tube source - costs
Date: Mon, 30 Oct 2006 22:36:12 -0500

Live 60 miles from Dillsburg, the bad thing now is he or I should say the
sons are buying foreign steel some is not of the same quality he had in
previous trips there. I bought the tubing there to fabricate the nose gear
on the Moose had a hard time getting it powder coated there is a substance
keeps bleeding through the coating finally got it to take as it is supposed
to do. Just my experience last spring with them. Dale SR-033

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

_________________________________________________________________
Buy, Load, Play. The new Sympatico / MSN Music Store works seamlessly with
Windows Media Player. Just Click PLAY.
http://musicstore.sympatico.msn.ca/cont ... Sept192006

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Sun Feb 19, 2012 11:21 am**

When I bought last from Dillsburg 1" x .058 was about $2.10/ft and Leavens
was $8 and change/ft.

----- Original Message -----
From: "steve whitenect" <srwhitenect@hotmail.com>
To: <rebel-builders@dcsol.com>
Sent: Monday, October 30, 2006 10:42 PM
Subject: RE: [rebel-builders] 4130 tube source - costs

Wayne, when I built my last tube and fab aircraft, believe it or not,
Leavens was the best price. I have bought the odd piece from them over
the
last couple of years and think there definately out to lunch on their
prices. I believe I have Dillsberg's info somewheres in the house. I am
a
little far away from ordering anything just yet. Have two sets of floats
to
build when and if I ever get into my new house this December and then I
have
to set up a shop to boot! Forget that I have to paint GMSG this spring
too.

Steve W

From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
Reply-To: <rebel-builders@dcsol.com>
To: <rebel-builders@dcsol.com>
Subject: [rebel-builders] 4130 tube source - costs
Date: Mon, 30 Oct 2006 21:57:54 -0500

There's only one place to buy 4130 tube... without taking your bank
manager.
Dillsberg Aeroplane Works..from their chicken barns full of tube. If you
need the phone number I'll dig out their leaflet.

Wayne

----- Original Message -----
From: "steve whitenect" <srwhitenect@hotmail.com>
To: <rebel-builders@dcsol.com>
Sent: Monday, October 30, 2006 9:54 PM
Subject: Re: [rebel-builders] Anthem, AZ

Thanks Drew
I saw this last week when I was surfing the web. The only thing that
bothers me after researching the Bearhawk several years ago is the
extravagant landing gear and aileron/flap hinges but I understand that
someone is making some of the parts. Do u think that the raw tubing
for
the
Patrol would be about or more than 3,500.US? I have not priced 4130
tubing
for quite some time but is most likely up in price. Reviews on the
plane
are very inpressive. Have a soft spot for the Maule look-a-like too!

Steve W

_________________________________________________________________
Buy, Load, Play. The new Sympatico / MSN Music Store works seamlessly
with
Windows Media Player. Just Click PLAY.

http://musicstore.sympatico.msn.ca/cont ... Sept192006

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

_________________________________________________________________
Ready for the world's first international mobile film festival celebrating
the creative potential of today's youth? Check out Mobile Jam Fest for
your
a chance to WIN $10,000! www.mobilejamfest.com

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Sun Feb 19, 2012 11:21 am**

As Steve also states...that is only the processing/rust proofing oil. It is
a nightmare to get it all off for paint etc. Guess the processors figure
more is better than less.

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Monday, October 30, 2006 10:46 PM
Subject: Re: [rebel-builders] 4130 tube source - costs

Thanks for the update Dale. Issue is everyone (suppliers) buys from them
as
their father would "buy out" the whole mill run for stock.

----- Original Message -----
From: "Dale Fultz" <dfultz17086@earthlink.net>
To: <rebel-builders@dcsol.com>
Sent: Monday, October 30, 2006 10:36 PM
Subject: Re: [rebel-builders] 4130 tube source - costs

Live 60 miles from Dillsburg, the bad thing now is he or I should say the
sons are buying foreign steel some is not of the same quality he had in
previous trips there. I bought the tubing there to fabricate the nose
gear
on the Moose had a hard time getting it powder coated there is a
substance
keeps bleeding through the coating finally got it to take as it is
supposed
to do. Just my experience last spring with them. Dale SR-033

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Sun Feb 19, 2012 11:21 am**

I am not an expert on steel and it's particles , the powder coating company
used some kind of acid on it the first time as they do with all there steel
prep,, didn't work, then they used toluline (excuse my spelling ) the
second time after two applications they used that it worked for the most
part if I don't show you where it is you won't see it now (this was only on
the tubing from Dillsburg the tubing from Airspruce was fine ).. Just as a
comparison Wayne,, Airspruce has actually been cheaper when shipping from
Georgia for me then from Dillsburg here in PA the tubing I ordered today
from Airspruce to make the steering links for the nose gear was $2.99 a ft
as $3.06 a ft. from Dillsburg and they will only cut 4 ft. pieces now (not a
big deal ) but the one size I only needed a foot so I would have had waste
also... I guess it's a sign of the changing times... Dale

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Sun Feb 19, 2012 11:21 am**

Thanks again Dale, Guess the son's are getting greedy. An unfortunate
reality when family businesses move on to those that didn't build them up
from the ground. Eaton's comes to mind for me.... ;O)

----- Original Message -----
From: "Dale Fultz" <dfultz17086@earthlink.net>
To: <rebel-builders@dcsol.com>
Sent: Monday, October 30, 2006 11:14 PM
Subject: Re: [rebel-builders] 4130 tube source - costs

I am not an expert on steel and it's particles , the powder coating company
used some kind of acid on it the first time as they do with all there
steel
prep,, didn't work, then they used toluline (excuse my spelling ) the
second time after two applications they used that it worked for the most
part if I don't show you where it is you won't see it now (this was only
on
the tubing from Dillsburg the tubing from Airspruce was fine ).. Just as a
comparison Wayne,, Airspruce has actually been cheaper when shipping from
Georgia for me then from Dillsburg here in PA the tubing I ordered today
from Airspruce to make the steering links for the nose gear was $2.99 a ft
as $3.06 a ft. from Dillsburg and they will only cut 4 ft. pieces now (not
a
big deal ) but the one size I only needed a foot so I would have had waste
also... I guess it's a sign of the changing times... Dale

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------