[rebel-builders] SR Weight and Balance Spreadsheet

[Bob Patterson]

Thanks Mike !

I notice the 2 top boxes don't multiply ....

Don't know if anyone has dropped a plumb from the leading edge,
but, according to an old factory W & B, the wheel axles on the SR
are about 1.5 inches AHEAD of the leading edge - which gives them a
moment of -1.5 .... just a thought - worth checking !!

--
......bobp
http://bpatterson.qhealthbeauty.com
http://apatterson2.qhealthzone.com
http://apatterson2.qbeautyzone.com
-------------------------------orig.-------------------------
On Saturday 30 September 2006 10:12 pm, Mike Kimball wrote:

I just uploaded a weight and balance spreadsheet with elements heavily
borrowed from the ones Mike Davis prepared along with a couple of additions
of my own in case anyone is interested. It's in the software section.

Mike Kimball
044SR

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[S A]

Mike the charts I have from Murphy show the allowable CG from 9 to 20.4 IF
using the wing leading edge as datum.
If using the center of main gear it is 10.5 to 21.9?
Or either way 15 to 34% chord?
Scott


On 9/30/06, Mike Kimball <mkimball@gci.net> wrote:

I just uploaded a weight and balance spreadsheet with elements heavily
borrowed from the ones Mike Davis prepared along with a couple of
additions
of my own in case anyone is interested. It's in the software section.

Mike Kimball
044SR




-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Mike Kimball]

I was just using the numbers from the manual. Oops. Why'd I do that?
Maybe I'll just use 11 to 20 as my limits to be safe.

Mike

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of S A
Sent: Saturday, September 30, 2006 7:55 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] SR Weight and Balance Spreadsheet

Mike the charts I have from Murphy show the allowable CG from 9 to 20.4 IF
using the wing leading edge as datum.
If using the center of main gear it is 10.5 to 21.9?
Or either way 15 to 34% chord?
Scott


On 9/30/06, Mike Kimball <mkimball@gci.net> wrote:

I just uploaded a weight and balance spreadsheet with elements heavily
borrowed from the ones Mike Davis prepared along with a couple of
additions
of my own in case anyone is interested. It's in the software section.

Mike Kimball
044SR




-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------