The Murphy Builders Site

*******************
I received 15 EL-26 elevator-rudder ribs in my kit. I used five
for the rudder. It looks like I am going to use four more for
each elevator. That leaves two. Are those spares? I really hate
it when there are parts on the workbench after I put something
together! Haha!
*******************

Thanks a bunch guys!
Rich

From: "N.Smith" <admin@airnig.co.uk>
Reply-To: <rebel-builders@dcsol.com>
To: <rebel-builders@dcsol.com>
Subject: RE: [rebel-builders] Rebel - Elevator Control Horn Alignment
Date: Fri, 8 Sep 2006 11:51:33 +0100

Hi Rich
On the Elite it bolts onto the forward spar, and runs up and down 90
degrees
from the spar IE straight up and down from a horizontal elevator. I guess
on
your type it may be different though.
Nig
745E

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Rich Dodson
Sent: 08 September 2006 11:10
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Rebel - Elevator Control Horn Alignment


Thanks Jeff!

Do you know the answer to my previous question on the control horn
alignment
on the elevators? I have not gotten any answers from here or Murphy tech
support.

All I need to know is how the control horn is aligned to the line made by
the elevator's ribs. Does it hang down perpendicularly?

Thanks again.





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------