The Murphy Builders Site

hi all

am plumbing my 0-320 b3b, can some one tell me are there primer
connectionsto all 4 cylinders, the murphy firewall forward kit i
got only has on brass
"t" in it which would only allow 2 cylinders to have primer
connections, if
all 4 cylinders get primer connection then i need 3 "t"s all together

thank

mike#007




-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

hi all

am plumbing my 0-320 b3b, can some one tell me are there primer
connectionsto all 4 cylinders, the murphy firewall forward kit i
got only has on brass
"t" in it which would only allow 2 cylinders to have primer
connections, if
all 4 cylinders get primer connection then i need 3 "t"s all together

thank

mike#007




-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

does it matter which cylinders get primer ??

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
WALTER KLATT
Sent: Friday, September 01, 2006 3:03 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] engine primer connection


I only have 2 cyl on mine, and it works fine.

Walter

----- Original Message -----
From: "Jones, Michael" <Michael.Jones@snclavalin.com>
Date: Friday, September 1, 2006 11:59 am
Subject: [rebel-builders] engine primer connection

hi all

am plumbing my 0-320 b3b, can some one tell me are there primer
connectionsto all 4 cylinders, the murphy firewall forward kit i
got only has on brass
"t" in it which would only allow 2 cylinders to have primer
connections, if
all 4 cylinders get primer connection then i need 3 "t"s all together

thank

mike#007




-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

does it matter which cylinders get primer ??

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
WALTER KLATT
Sent: Friday, September 01, 2006 3:03 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] engine primer connection


I only have 2 cyl on mine, and it works fine.

Walter

----- Original Message -----
From: "Jones, Michael" <Michael.Jones@snclavalin.com>
Date: Friday, September 1, 2006 11:59 am
Subject: [rebel-builders] engine primer connection

hi all

am plumbing my 0-320 b3b, can some one tell me are there primer
connectionsto all 4 cylinders, the murphy firewall forward kit i
got only has on brass
"t" in it which would only allow 2 cylinders to have primer
connections, if
all 4 cylinders get primer connection then i need 3 "t"s all together

thank

mike#007




-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

hi Wayne

can do 2 or 4 at this point, just wondering what is accepted practise for
0-320 2 or 4

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Wayne G. O'Shea
Sent: Friday, September 01, 2006 3:24 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] engine primer connection


If you are only going to do two...do two opposing cylinders. Two rear ones
would be easiest.

----- Original Message -----
From: "Jones, Michael" <Michael.Jones@snclavalin.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, September 01, 2006 3:05 PM
Subject: RE: [rebel-builders] engine primer connection

does it matter which cylinders get primer ??

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
WALTER KLATT
Sent: Friday, September 01, 2006 3:03 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] engine primer connection


I only have 2 cyl on mine, and it works fine.

Walter

----- Original Message -----
From: "Jones, Michael" <Michael.Jones@snclavalin.com>
Date: Friday, September 1, 2006 11:59 am
Subject: [rebel-builders] engine primer connection

hi all

am plumbing my 0-320 b3b, can some one tell me are there primer
connectionsto all 4 cylinders, the murphy firewall forward kit i
got only has on brass
"t" in it which would only allow 2 cylinders to have primer
connections, if
all 4 cylinders get primer connection then i need 3 "t"s all together

thank

mike#007




-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

hi all

am plumbing my 0-320 b3b, can some one tell me are there primer connections
to all 4 cylinders, the murphy firewall forward kit i got only has on brass
"t" in it which would only allow 2 cylinders to have primer connections, if
all 4 cylinders get primer connection then i need 3 "t"s all together

thank

mike#007




-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

hi all

am plumbing my 0-320 b3b, can some one tell me are there primer
connections to all 4 cylinders, the murphy firewall forward kit i got
only has on brass "t" in it which would only allow 2 cylinders to have
primer connections, if all 4 cylinders get primer connection then i
need 3 "t"s all together

thank

mike#007




-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login username
"rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------