The Murphy Builders Site

I would use MIL-C-27500 shielded wire and when in doubt go with the bigger
16 gauge wire (available from ACS - part number 11-14416). You probably
would be hard pressed to measure the weight difference between 16 and 18
gauge for the small amount of wire you will use.

Mike
044SR

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Jones,
Michael
Sent: Thursday, August 17, 2006 9:17 AM
To: Rebel-Builders (E-mail)
Subject: [rebel-builders] mag wire, tach cable

hi all

so its time to wire my mgs now, aero electric shows 18 ga shielded while
firewall forward by tony bingelis shows 16 ga shielded, which should i use,
also what is it i ask fro when ordering from spruce for these wires ?? mil
spec something ??

also tach cable, anything special i need to know to order the right one ??

mike#007




-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------