rear fus inside corner wraps?
Posted: Sun Feb 19, 2012 11:03 am
On the rear fuselage section it is unclear to me whether each corner wrap
should be riveted to the previous one where they overlap. There isn't enf
material on the inside bulkhead corners to rivet to, but still, the wraps
could be riveted to each other and make things a little stiffer.
Opinions/Suggestions?
Thanks,
-Ben
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
should be riveted to the previous one where they overlap. There isn't enf
material on the inside bulkhead corners to rivet to, but still, the wraps
could be riveted to each other and make things a little stiffer.
Opinions/Suggestions?
Thanks,
-Ben
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------