The Murphy Builders Site

How do you fit the 90 degree bracket between the bottom of fus 27 and the
door post? The bottom leg of the bracket will have to do a zig-zag or
something to fit over the rivet heads that hold the fus 2. Should I drill
out 3 of those 3/16 rivets and then re-rivet with the bracket there, or
extend the bracket to zig-zag and hit the door post below the fus 2? Not a
very clear description, but those of you who have been there will get it I'm
sure. If I attach it using the existing 3/16 hole in the fus 2 per the
manual, then do I just use that one hole or drill 2 more? This would seem to
put many holes in a small area of the fus 2/door post intersection as the
3/16 holes are 3 abreast in this area. (sort of a triple nipple, one could
say)
Thanks
Jesse





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------