[rebel-builders] Vacuum pump direction
Posted: Sun Feb 19, 2012 10:56 am
In the dark recesses of my brain I recall that you can get them in either form. I also recall the part numbers are xxx CW and xxx CCW for clockwise and counterclockwise. I also recall that some engines use one version and others another (lyc vs cont). Keep in mind this is from the dark recesses and it could be a bad dream!
Rick Muller
SR70
-------------- Original message --------------
From: Mike Kimball <mkimball@gci.net>
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Rick Muller
SR70
-------------- Original message --------------
From: Mike Kimball <mkimball@gci.net>
When facing the drive gear that drives a vacuum pump it turns counter
clockwise. Looked at another way, if I was holding the vacuum pump in my
hand with the splined shaft facing me it would be turning clockwise. Does
this mean that when ordering a vacuum pump I should order counter clockwise
or clockwise? I don't know what the convention is.
Mike
044SR
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------