The Murphy Builders Site

Yes Allen - Trim them also to the 4" overlap with the same number (9) of
rivets. - I am sure it is in the manual, In mine it is on page 5 and 11 of
the fus. section. - Bob Johnson (Rebel 652,725 and ???, Moose 226)
----- Original Message -----
From: "apoulsen" <apoulsen@comcast.net>
To: <rebel-builders@dcsol.com>
Sent: Friday, June 16, 2006 11:34 AM
Subject: [rebel-builders] fus bulkheads

Hello all,

Started the fus to my rebel but not sure if I'm supposed to trim the
length of the bulkheads on the sides. The manual addresses the 4"overlap
on top and bottom but the overlap is about 12" on the sides. Do you trim
them down to the 4" overlap? If not, how many rivets?

Thanks,

Allen Poulsen
786R



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------