The Murphy Builders Site

HI KEN

dont know if diff between larger and smaller, only got the one size
so dont
know if i have big or small, they seem pretty firm however

mike

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf
Of Ken
Sent: Friday, June 02, 2006 8:06 AM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] conical engine mounting torques


Is the large one softer perhaps Mike ?
This is probably a TLAR situation.
Ken
(that looks about right) ;)

Jones, Michael wrote:

hi all

firewall wall forward by tony bingelis list following torques for
rubber
mount bushings for conical engine mounts

small bushing 80 in-lbs
large bushings 40 in-lbs

i would have thought larger bushing would have higher torque
value, are
these numbers backwards
anybody help on this

mike#007

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------