The Murphy Builders Site

I finally got the engine mounted and am ready to start on the baffles. I

Tim
SR060



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Tim:
I can't help you with the baffles, but I do have the same engine (not
mounted) from George Coy. Would be very interested in what you end up
with,
it could help those of us with the same or similar engine. Also, are you
using the Murphy cowling, or are you making your own? I heard the Murphy
cowling won't fit the G1D5 without modifications.
Tom Packard
SR 043
----- Original Message -----
From: "Tim Saxton" <tim.saxton@shaw.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, May 31, 2006 12:28 AM
Subject: [rebel-builders] SR IO-540 baffles

I finally got the engine mounted and am ready to start on the baffles. I

have paper templates for the baffles that came with the engine but it
turns
out the pattern is for an O-540. The cut outs for the cylinder heads are
different; I suppose this is the difference between parrallel valve and
angle valve engines. Mine is an angle valve (IO-540-G1D5). Where can I
find
templates for this engine? Better yet, does anyone have notes and pictures
for a similar install? I could modify the O-540 templates to fit but I'm
worried that there might be other dimensional differences that will make
this more work than it seems.

Tim
SR060



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

--- http://USFamily.Net/dialup.html - $8.25/mo! --
http://www.usfamily.net/dsl.html - $19.99/mo! ---




-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

I finally got the engine mounted and am ready to start on the baffles. I

Tim
SR060

Hi Tim !

Might be worth checking with Van's - they use 540's in the
RV-10.
The Van's baffles for the 320 & 360 are beautifully cut & shaped -
all you have to do is trim the tops to fit whatever cowl you're
using, and you're done !! :-)

--
......bobp
http://bpatterson.qhealthbeauty.com

-------------------------------orig.-------------------------
On Wednesday 31 May 2006 05:28 am, Tim Saxton wrote:

I finally got the engine mounted and am ready to start on the
baffles. I

have paper templates for the baffles that came with the engine but
it turns
out the pattern is for an O-540. The cut outs for the cylinder
heads are
different; I suppose this is the difference between parrallel valve
and angle
valve engines. Mine is an angle valve (IO-540-G1D5). Where can I find
templates for this engine? Better yet, does anyone have notes and
pictures
for a similar install? I could modify the O-540 templates to fit
but I'm
worried that there might be other dimensional differences that will
make this
more work than it seems.

Tim
SR060

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Hi Bob,
do you have the link to Van,s .I am interested in the Baffles for
my Lyc 0-320.
thanks
Hans 640E
On 1-Jun-06, at 7:45 AM, Bob Patterson wrote:

Hi Tim !

Might be worth checking with Van's - they use 540's in the
RV-10.
The Van's baffles for the 320 & 360 are beautifully cut & shaped -
all you have to do is trim the tops to fit whatever cowl you're
using, and you're done !! :-)

--
......bobp
http://bpatterson.qhealthbeauty.com

-------------------------------orig.-------------------------
On Wednesday 31 May 2006 05:28 am, Tim Saxton wrote:

I finally got the engine mounted and am ready to start on the
baffles. I

have paper templates for the baffles that came with the engine but
it turns
out the pattern is for an O-540. The cut outs for the cylinder
heads are
different; I suppose this is the difference between parrallel valve
and angle
valve engines. Mine is an angle valve (IO-540-G1D5). Where can I find
templates for this engine? Better yet, does anyone have notes and
pictures
for a similar install? I could modify the O-540 templates to fit
but I'm
worried that there might be other dimensional differences that will
make this
more work than it seems.

Tim
SR060

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Kind regards

Western Transportation
c/o Hans Kuck
P.O. Box 36023, 10991 # 1 Road
Richmond B.C. V7E 3E6
Canada
Ph. 604 244 0480
Fx. 604 244 0482
Cl. 778 773 8364
mailto:hansk3d@dccnet.com







-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

www.vansaircraft.com Dale SR-033
----- Original Message -----
From: "Hans Kuck" <hansk3d@dccnet.com>
To: <rebel-builders@dcsol.com>
Sent: Thursday, June 01, 2006 11:11 AM
Subject: Re: [rebel-builders] SR IO-540 baffles

Hi Bob,
do you have the link to Van,s .I am interested in the Baffles for
my Lyc 0-320.
thanks
Hans 640E
On 1-Jun-06, at 7:45 AM, Bob Patterson wrote:

Hi Tim !

Might be worth checking with Van's - they use 540's in the
RV-10.
The Van's baffles for the 320 & 360 are beautifully cut & shaped -
all you have to do is trim the tops to fit whatever cowl you're
using, and you're done !! :-)

--
......bobp
http://bpatterson.qhealthbeauty.com

-------------------------------orig.-------------------------
On Wednesday 31 May 2006 05:28 am, Tim Saxton wrote: have paper templates for the baffles that came with the engine but
it turns
out the pattern is for an O-540. The cut outs for the cylinder
heads are
different; I suppose this is the difference between parrallel valve
and angle
valve engines. Mine is an angle valve (IO-540-G1D5). Where can I
find
templates for this engine? Better yet, does anyone have notes and
pictures
for a similar install? I could modify the O-540 templates to fit
but I'm
worried that there might be other dimensional differences that will
make this
more work than it seems.

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Kind regards

Western Transportation
c/o Hans Kuck
P.O. Box 36023, 10991 # 1 Road
Richmond B.C. V7E 3E6
Canada
Ph. 604 244 0480
Fx. 604 244 0482
Cl. 778 773 8364
mailto:hansk3d@dccnet.com







-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Tim:
I can't help you with the baffles, but I do have the same engine (not
mounted) from George Coy. Would be very interested in what you end up
with,
it could help those of us with the same or similar engine. Also, are you
using the Murphy cowling, or are you making your own? I heard the Murphy
cowling won't fit the G1D5 without modifications.
Tom Packard
SR 043
----- Original Message -----
From: "Tim Saxton" <tim.saxton@shaw.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, May 31, 2006 12:28 AM
Subject: [rebel-builders] SR IO-540 baffles

I finally got the engine mounted and am ready to start on the baffles. I

have paper templates for the baffles that came with the engine but it
turns
out the pattern is for an O-540. The cut outs for the cylinder heads are
different; I suppose this is the difference between parrallel valve and
angle valve engines. Mine is an angle valve (IO-540-G1D5). Where can I
find
templates for this engine? Better yet, does anyone have notes and pictures
for a similar install? I could modify the O-540 templates to fit but I'm
worried that there might be other dimensional differences that will make
this more work than it seems.

Tim
SR060



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

--- http://USFamily.Net/dialup.html - $8.25/mo! --
http://www.usfamily.net/dsl.html - $19.99/mo! ---




-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.8.1/354 - Release Date: 6/1/2006