Aileron bushing length?
Posted: Sun Feb 19, 2012 10:52 am
Does anyone have an AIL-26 aileron bushing they can measure for me? I can't
find any of the ones I'm supposed to have but I have a bit of 4130 steel
tubing that I can make my own. I measured the brass fitting the bushing
goes into and it is 0.48 inches. I know the steel bushing should be a bit
longer but I'm not sure how much longer works the best. Too long and the
flaps and ailerons can move too much side to side. Too short and they may
not move at all.
Mike
044SR
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
find any of the ones I'm supposed to have but I have a bit of 4130 steel
tubing that I can make my own. I measured the brass fitting the bushing
goes into and it is 0.48 inches. I know the steel bushing should be a bit
longer but I'm not sure how much longer works the best. Too long and the
flaps and ailerons can move too much side to side. Too short and they may
not move at all.
Mike
044SR
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------