The Murphy Builders Site

Can anyone tell me please what I am doing wrong.
I am trying to mate the Cabin to the Tail Cone.
I get the sides nicely together without Oil Canning, however the Cabin
Roof is about 3/16 to short.
Or I can get the roof nicely lined up and the bottom of the cabin and
the Tail Cone
but not the top part of the sides. I had all three together about
three weeks ago .
Since then I in stalled spacers (1/4 ")between the bulkheads that holds
the Float attachment to stiffen up the sloppy bulkhead.
Does anyone have the the precise measurements between bulkheads?
Any help would be much appreciated!!!
Thanks
Hans

On 20-May-06, at 4:22 PM, David L. Tuck wrote:

Can anyone tell me why ? they ( mam ) is using such a large tail
spring? I
don't see any reason that a spring off a luscombe or other small
taildragger
wouldn't work.
Are there any other ideas out there ? I saw the trailer spring in the
archives, and that seems to be the only tail spring system that I
saw in
there.
I think that is whats causing all the cracking in the fus 30 ?
Thanks
Dave T/ 009





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Kind regards

Western Transportation
c/o Hans Kuck
P.O. Box 36023, 10991 # 1 Road
Richmond B.C. V7E 3E6
Canada
Ph. 604 244 0480
Fx. 604 244 0482
Cl. 778 773 8364
mailto:hansk3d@dccnet.com







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------