The Murphy Builders Site

FYI - In case you're interested, the guy that built my engine mount still
has the necessary jigs to create additional mounts and may be interested in
producing more. Rick and anyone else crazy enough to go the V8 route, let
me know off list and I can talk to the mount builder. You'll have to use a
block with the same mounting points as mine. It should be standard Chevy
350.

Mike
044SR

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
rickhm@comcast.net
Sent: Monday, May 15, 2006 3:44 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] 4130 wall thickness

I am taking a brief survey of those who have built their own engine mount.
I'm hoping Mike K. will respond. What size tubing and wall thickness is the
majority of engine mounts constructed from? I am building a SR2500 with a
V8.

Rick Muller
SR70



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------