The Murphy Builders Site

Hi all,

I'm working in very tight space (10' X 13') and would like to delay renting
a largeer space as long as possible.

I would like to know if someone can give me the length of the fus from
firewall to the solid bulkhead just before the tail wrap. Also would
appreciate opinions on whether I would be creating problems for myself if I
built this part of the fus and then came back to add the tail cone and tail
later.

Thanks in advance.

Allen Poulsen
786R

Hi Allen !

One of our local Rebel builders did most of it in a 1 bedroom
apartment,
then moved to a single car garage - he built the cabin section complete to
the rear corner wraps, leaving them just cleco'd, then the tailcone
complete,
including fitting stab. All the completed components were then moved to a
large hangar at the airport for final assembly - it flew about 3 months
later.

So..... YES ! Go ahead as you are planning !

......bobp

-------------------------------orig.-------------------------
On Friday 12 May 2006 01:16 pm, apoulsen wrote:

Hi all,

I'm working in very tight space (10' X 13') and would like to delay
renting
a largeer space as long as possible.

I would like to know if someone can give me the length of the fus from
firewall to the solid bulkhead just before the tail wrap. Also would
appreciate opinions on whether I would be creating problems for myself if
I
built this part of the fus and then came back to add the tail cone and
tail
later.

Thanks in advance.

Allen Poulsen
786R

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Must not be married....

Allen
----- Original Message -----
From: "Bob Patterson" <beep@sympatico.ca>
To: <rebel-builders@dcsol.com>
Sent: Friday, May 12, 2006 10:00 AM
Subject: Re: [rebel-builders] Rebel dimensions

Hi Allen !

One of our local Rebel builders did most of it in a 1 bedroom
apartment,
then moved to a single car garage - he built the cabin section complete

the rear corner wraps, leaving them just cleco'd, then the tailcone
complete,
including fitting stab. All the completed components were then moved to

large hangar at the airport for final assembly - it flew about 3 months
later.

So..... YES ! Go ahead as you are planning !

......bobp

-------------------------------orig.-------------------------
On Friday 12 May 2006 01:16 pm, apoulsen wrote:

Hi all,

I'm working in very tight space (10' X 13') and would like to delay
renting
a largeer space as long as possible.

I would like to know if someone can give me the length of the fus from
firewall to the solid bulkhead just before the tail wrap. Also would
appreciate opinions on whether I would be creating problems for myself

I
built this part of the fus and then came back to add the tail cone and
tail
later.

Thanks in advance.

Allen Poulsen
786R

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Must not be married....

Allen
----- Original Message -----
From: "Bob Patterson" <beep@sympatico.ca>
To: <rebel-builders@dcsol.com>
Sent: Friday, May 12, 2006 10:00 AM
Subject: Re: [rebel-builders] Rebel dimensions

Hi Allen !

One of our local Rebel builders did most of it in a 1 bedroom
apartment,
then moved to a single car garage - he built the cabin section complete
to the rear corner wraps, leaving them just cleco'd, then the tailcone
complete,
including fitting stab. All the completed components were then moved to a
large hangar at the airport for final assembly - it flew about 3 months
later.

So..... YES ! Go ahead as you are planning !

......bobp

-------------------------------orig.-------------------------

On Friday 12 May 2006 01:16 pm, apoulsen wrote:

Hi all,

I'm working in very tight space (10' X 13') and would like to delay
renting
a largeer space as long as possible.

I would like to know if someone can give me the length of the fus from
firewall to the solid bulkhead just before the tail wrap. Also would
appreciate opinions on whether I would be creating problems for myself
if I
built this part of the fus and then came back to add the tail cone and
tail
later.

Thanks in advance.

Allen Poulsen
786R

Some wimmin are more tolerant than others Allen ! We have one guy, that we
haven't heard from for some time, that built his entire Rebel in the
living
room. Deal was his wife got a new kitchen after he was done ripping her
cupboards out and cutting a hole in the wall to get his fuselage out of
the
house!

----- Original Message -----
From: "apoulsen" <apoulsen@comcast.net>
To: <rebel-builders@dcsol.com>
Sent: Friday, May 12, 2006 5:44 PM
Subject: Re: [rebel-builders] Rebel dimensions

Must not be married....

Allen
----- Original Message -----
From: "Bob Patterson" <beep@sympatico.ca>
To: <rebel-builders@dcsol.com>
Sent: Friday, May 12, 2006 10:00 AM
Subject: Re: [rebel-builders] Rebel dimensions

Hi Allen !

One of our local Rebel builders did most of it in a 1 bedroom
apartment,
then moved to a single car garage - he built the cabin section complete

to

the rear corner wraps, leaving them just cleco'd, then the tailcone
complete,
including fitting stab. All the completed components were then moved to

a

large hangar at the airport for final assembly - it flew about 3 months
later.

So..... YES ! Go ahead as you are planning !

......bobp

-------------------------------orig.-------------------------
On Friday 12 May 2006 01:16 pm, apoulsen wrote:

if

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------