Page 1 of 1

[rebel-builders] Vans parts

Posted: Sun Feb 19, 2012 10:44 am
by Wayne G. O'Shea
I put an airwolf on Howard's 10 years ago. Works well. To use the B&C 45*
unit I think you need an 1 3/4 spacer for it to work. That number is from
memory...there are guys here that have installed it that can give the number
for sure.

Baffle kit will work...but of course you'll have to do some trimming to make
it fit the Elite cowl. As for the exhaust..doubtful !

----- Original Message -----
From: "Mike Betti" <mbetti@up.net>
To: <rebel-builders@dcsol.com>
Sent: Saturday, May 06, 2006 8:43 PM
Subject: [rebel-builders] Vans parts

Elite builders,
Does the Vans exhaust system and baffle kit work on the 0360 in the Elite?
How about the 45 degree spin on oil filter adapter, that puts the filter
pointing upper left, I'm thinking it will hit the engine mount? Any body use
anything other than a remote setup? Air Wolf?
Thanks,
Mike Betti



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Vans parts

Posted: Sun Feb 19, 2012 10:44 am
by Alan Hepburn
Mike:

I am using the Vans baffles, carb air box, spinner, carburettor controls
bracket. All are satisfactory. Also the Air Wolf filter works well.

Al






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Vans parts

Posted: Sun Feb 19, 2012 10:44 am
by Mike Betti
Thanks Wayne,
I would be interested in that part no. if any one has it. It would be nice
to have 2 less hoses hanging out there.
Mike Betti
771E
----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Saturday, May 06, 2006 7:48 PM
Subject: Re: [rebel-builders] Vans parts

I put an airwolf on Howard's 10 years ago. Works well. To use the B&C 45*
unit I think you need an 1 3/4 spacer for it to work. That number is from
memory...there are guys here that have installed it that can give the
number
for sure.

Baffle kit will work...but of course you'll have to do some trimming to
make
it fit the Elite cowl. As for the exhaust..doubtful !

----- Original Message -----
From: "Mike Betti" <mbetti@up.net>
To: <rebel-builders@dcsol.com>
Sent: Saturday, May 06, 2006 8:43 PM
Subject: [rebel-builders] Vans parts

Elite builders,
Does the Vans exhaust system and baffle kit work on the 0360 in the
Elite?
How about the 45 degree spin on oil filter adapter, that puts the filter
pointing upper left, I'm thinking it will hit the engine mount? Any body
use
anything other than a remote setup? Air Wolf?
Thanks,
Mike Betti



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Vans parts

Posted: Sun Feb 19, 2012 10:44 am
by Mike Betti
Thanks Al,
Who's exhaust do you have?
Mike
----- Original Message -----
From: "Alan Hepburn" <ahepburn@renc.igs.net>
To: <rebel-builders@dcsol.com>
Sent: Saturday, May 06, 2006 9:26 PM
Subject: RE: [rebel-builders] Vans parts

Mike:

I am using the Vans baffles, carb air box, spinner, carburettor controls
bracket. All are satisfactory. Also the Air Wolf filter works well.

Al






-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Vans parts

Posted: Sun Feb 19, 2012 10:44 am
by Alan Hepburn
I have the standard Murphy one (Forsling). Jack Wiebe has a really
nice one, incorporating heater muffs. Not sure the manufacturere, but
could find out. The Murphy heater muffs are difficult to keep inside
the cowl.

Al.






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Vans parts

Posted: Sun Feb 19, 2012 10:44 am
by mbetti
Al,
I don't know Jack Wiebe but I seen the name before, would appreciate if you could find out.
Thanks,
Mike Betti
771E

On Mon, 8 May 2006 07:51:23 -0400, rebel-builders@dcsol.com said:
I have the standard Murphy one (Forsling). Jack Wiebe has a really
nice one, incorporating heater muffs. Not sure the manufacturere, but
could find out. The Murphy heater muffs are difficult to keep inside
the cowl.

Al.






-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------