Wiring through Firewall
Posted: Sun Feb 19, 2012 10:43 am
Hi All
What's the best way to get your battery to starter wiring through the
stainless firewall . I gather a hole with a grommet in it is acceptable, but
is there a more robust way with less chance of eventual eroding of the cable
insulation ? I'm happy with low current or wiring with a CB to trip using a
grommet, but the starter supply cable runs straight from the battery and
could seriously ruin your afternoon if it shorted to the firewall.
Any ideas ?
Nigel
745E
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
What's the best way to get your battery to starter wiring through the
stainless firewall . I gather a hole with a grommet in it is acceptable, but
is there a more robust way with less chance of eventual eroding of the cable
insulation ? I'm happy with low current or wiring with a CB to trip using a
grommet, but the starter supply cable runs straight from the battery and
could seriously ruin your afternoon if it shorted to the firewall.
Any ideas ?
Nigel
745E
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------