The Murphy Builders Site

Hi All
Hoping I can get some help with this. Wayne, would appreciate a reply from
u if your not busy. Working at the inner controls with wings on etc. I can
get 25* of down flaperon travel and 10* of reflex with stick in the neutral
position. Is this too much? Nowhere in the manuel are the degree of the
flaperons mentioned. I have the electric flap setup and this is the travel I
get with the internal limiter switches. I don't want to have to put a
second set on if I don't have to. The 10* really lets the lower leading edge
of the flaperon protrude. I could adjust it to get 30* of down flaperon and
5* of reflex. Also how much travel (degrees) up and down for the
aileron/stick travel.

Steve W 637R





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------