Page 1 of 1

wheel alignment

Posted: Sun Feb 19, 2012 10:39 am
by Ralph Baker
The new Vans catalog also lists whel alignment wedges in 1/2 and 1 degree adjustment. Have not yet confirmed that the bolt patterns are same as MAM.
Rallph Baker



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Wheel alignment

Posted: Sun Feb 19, 2012 10:59 am
by Mike Kimball
I went through the archives and discovered the toe out versus toe in
controversy and also the frequent comment about setting them straight ahead
and leave it at that. I measured the distance between my tires at the front
and at the back and the front measurement is one centimeter less than the
back. So I have a slight toe in. I'm inclined to just leave it that way.
I figure it would only be bad if one was straight and the other accounted
for the entire toe in. Any tips for making sure that isn't the case?

Mike
044SR





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------